Overview
The Icon Suspension Front 3.0 VS Series coilover reservoir shock absorber, part number 95002, is a front coilover shock for the 2017–2018 Ford F-150 Raptor, the second generation of that truck. It adjusts from 1 to 3 inches of front lift height and mounts into the factory shock location in a bolt-in design. It fits the Raptor model only.
The second generation Raptor moved its shock mounting points higher on the chassis, and the 3.0 Series adds shaft travel with a barreled coil spring for more efficient packaging. Vehicle-specific valving and engineered springs work together for on-road ride quality and off-road performance.
Key features
- Adjustable front lift height from 1 to 3 inches
- 50% increase in damping ability over OE shocks
- Multi-stage hydraulic Bump Zone adds damping in the last 40% of compression travel
- CDC valve with 10 compression damping settings
- 10 inch finned aluminum reservoirs
- Barreled coil springs, which Icon says are guaranteed for life against sagging or breakage
- 1 inch CNC machined shock shafts with FK Rod End COM12 spherical bearings
- Fully serviceable for revalves, rebuilds and service
Raptor shock setup tips
High-speed desert running puts sustained heat into front shocks, and a reservoir design helps spread that heat over a larger body. Long runs with frequent hard compression can also wear the seals faster than occasional trail use, so the oil level and seal condition are worth checking after each trip.
Front lift height changes the position of the shock and the angle of the steering components, so set the height before the final alignment. Make sure the upper mount clears the fender and the steering stops at full compression, especially with larger tires.
Shocks on a truck used this hard should be inspected every season. Look for oil on the body, check the shaft finish and confirm the bolts remain tight. Because the unit can be revalved and rebuilt, service is often a better choice than replacement when the damping starts to fade.
- Check seal condition after long high-speed runs
- Confirm upper mount clearance at full compression
- Re-torque hardware after the first few trips
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 95002 |
| UPC | 700008588221 |
| Series | 3.0 Coilover Reservoir |
| Position | Front |
| Lift height | 1 to 3 inches |
| Reservoir | 10 inch finned aluminum |
| Shaft | 1 inch CNC machined |
| Rod ends | FK Rod End COM12 spherical bearings |
| Finish | CAD plated shock body, hard anodized piston and top cap |
| Compression damping | CDC valve, 10 settings |
| Bump Zone | Multi-stage hydraulic |
| Fitment type | Bolt-in, OEM shock location |
| OEM wheels and tires | Yes |
| Aftermarket wheels | 8.5 inch wide with 5 inch backspace |
| Aftermarket tires | 35×12.50; larger tires may fit with fender trimming and modifications |
Vehicle fitment
It fits the 2017–2018 Ford F-150 Raptor. No other F-150 trims are covered.
Other F-150 trims and model years outside 2017–2018 are not covered, including 2015–2016 and 2019-and-later trucks.
Installation notes
This is a bolt-in design for the OEM shock location. Because lift height is adjustable, set the height first and have the alignment checked afterward, since ride height changes alignment settings. Support the truck securely while the shock is removed.
What’s included
One coilover shock with the engineered coil springs. Check the package contents against your installation before starting.






