Select your vehicle

4.5 Lift Front Shock 2.0 Aluminum Series

Icon Suspension

Shop Dodge Ram 2500 Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front shock for Dodge Ram 2500 and 3500 trucks, 2003-2013
  • Built for a 4.5 inch lift
  • Aluminum body and reservoir tubing with 5/8 inch polished nitro steel shaft
  • 100% rebuildable and 100% revalveable

Description

Overview

The Icon Suspension 216523 is a front shock in the 2.0 Aluminum Series, built for a 4.5 inch lift on Dodge Ram 2500 and 3500 trucks from 2003 to 2013. It uses a nitrogen charged monotube design with an internal reservoir and a one piece linear/digressive piston.

The body and reservoir tubing are 6063 anodized aluminum, which offers heat dissipation and corrosion resistance. The shock uses premium grade 5WT oil for consistent damping.

Key features

  • Nitrogen charged monotube design with internal reservoir
  • One piece linear/digressive piston
  • 5/8 inch polished nitro steel shaft
  • Buna top out bumper for noise free operation
  • 100% rebuildable and 100% revalveable

Lift height and ride quality

Front shocks absorb the steering and bump loads that come through the front axle, so a lifted truck with a different suspension height needs shocks sized for that geometry. A shock built for a specific lift keeps its travel and damping in the right range, while a mismatched unit can bottom out or feel loose. Compare your current front lift with the shock’s intended height before ordering.

Aluminum bodies dissipate heat well, which helps during extended descents and hard use. Keep the body clean and inspect the seals and shaft for oil or scoring periodically. Front shocks are commonly replaced in pairs so both sides ride with similar damping, and worn steering stabilizers or bushings should be checked during the same job.

  • Confirm front lift before ordering
  • Inspect seals and shaft for oil or scoring
  • Check bushings and steering stabilizer during install

Specifications

Brand Icon Suspension
Part number 216523
UPC 70000638425
Position Front
Lift height 4.5 in
Series 2.0 Aluminum Series
Shaft 5/8 inch polished nitro steel
Body and reservoir tubing 6063 anodized aluminum
Rod end, top cap and internals 6061 aluminum
Shock oil Premium grade 5WT
Bushings Polyurethane with zinc plated sleeves

Vehicle fitment

Fitment covers the 2003-2010 Dodge Ram 2500 (Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4), the 2003-2010 Dodge Ram 3500 (Laramie, SLT, ST, SXT, Sport, TRX4), the 2011-2013 Ram 2500 (Big Horn, Laramie, Laramie Longhorn, Lone Star, Outdoorsman, Power Wagon, SLT, ST, Tradesman) and the 2011-2012 Ram 3500 (Laramie, Laramie Longhorn, SLT, ST).

Confirm fit for your vehicle’s year, model and trim before ordering, especially for model years after 2013.

Installation notes

Front geometry changes with a 4.5 inch lift, so schedule an alignment check once the shocks are in.

What’s included

The package contains one front shock absorber. Check the package contents against your installation before starting.

SKU: ICO216523 Category:

Specification

Shipping weight 4.00 lbs
Package dimensions 39.00 × 3.00 × 3.00 in
brands

Fitment

VehicleYearsTrims
Dodge Ram 25002003–2010Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4
Dodge Ram 35002003–2010Laramie, SLT, ST, SXT, Sport, TRX4
Ram 25002011–2013Big Horn, Laramie, Laramie Longhorn, Lone Star, Outdoorsman, Power Wagon, SLT, ST, Tradesman
Ram 35002011–2012Laramie, Laramie Longhorn, SLT, ST

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Icon 216523 fit a 2010 Dodge Ram 2500?

Yes. It fits the 2003-2010 Dodge Ram 2500 in Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX and TRX4 trims, so a 2010 model is covered. Confirm fit for your vehicle's trim before ordering.

What lift height is this front shock built for?

It is built for a 4.5 inch lift. Match your truck's current front lift to that figure before fitting it, since the shock is sized for that setup.

What materials are the shaft and body made from?

The shaft is 5/8 inch polished nitro steel. The rod end, top cap and internals are 6061 aluminum, and the body and reservoir tubing are 6063 anodized aluminum. Bushings are polyurethane with zinc plated sleeves.

Do aluminum shock bodies need special care?

Aluminum bodies need routine cleaning rather than special handling. Wash away mud and road salt, and inspect the body for dents or corrosion that could damage the seals. Keep the shaft clean as well to protect the seal lip.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Dodge Ram 2500 Shock Absorbers on Amazon