Overview
The Icon Suspension 211000 is an adjustable coilover kit for the front suspension. It has a 2.5 inch shock diameter, a large diameter coil spring, a race shock piston with flutter stack compression valving, a billet aluminum upper mount and a forked lower mount for factory-like fitment.
Ride height can be adjusted, and the kit is completely re-buildable. It is a direct fit for the front position, but the vehicles it suits must be confirmed before ordering.
Key features
- Adjustable ride height
- Race shock piston with flutter stack compression valving
- Large diameter coil spring
- Billet aluminum upper mount
- Forked lower mount for factory-like fitment
- 2.5 inch shock diameter with optimized shock location for maximum clearance
- Integrated bump and droop stops
- Completely re-buildable
Setting ride height and alignment
Adjustable coilovers change ride height by moving the spring seat, which changes the suspension geometry. After setting the height, check the alignment, since camber and caster can shift when the front end is raised or lowered. Set both sides to the same height so the vehicle sits level and the steering stays predictable.
Re-buildable coilovers can be serviced when seals, valving or springs wear, which often costs less than replacing the whole assembly. Clean the threads and check the bump and droop stops for wear at each service. Note the spring seat position before disassembly so the ride height can be restored accurately.
- Set both sides to the same height
- Re-check alignment after changes
- Inspect bump and droop stops
- Note spring seat position before service
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 211000 |
| UPC | 70000565005 |
| Position | Front |
| Shock diameter | 2.5 inch |
| Upper mount | Billet aluminum |
| Lower mount | Forked |
| Piston | Race shock piston with flutter stack compression valving |
| Coil spring | Large diameter |
| Shaft | Nitro-steel, will not chip or rust like chrome shafts |
| Body finish | Cad-plated threaded body; Extreme Weather Plating option available |
| Made in | USA |
Vehicle fitment
Fitment is for the front position. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because ride height is adjustable, check the alignment after you set the height on the coilovers.
What’s included
The kit includes the coilover shock with its large diameter coil spring. Check the package contents against your installation before starting.

