Overview
The Icon Suspension 217701P is a pair of Vehicle Specific (V.S.) 2.5 Series piggyback reservoir shocks for a 2-3 inch lift. It fits the 2003-2010 Dodge Ram 2500 and 3500 and the 2011-2013 Ram 2500 and 2011-2012 Ram 3500, and comes with all required hardware.
ICON says V.S. 2.5 Series shocks are configured specifically for each application in both length and damping tune, and are 100% rebuildable and 100% revalveable. On piggyback applications a 6061 billet aluminum manifold a few inches below the top cap creates an internal Bump Zone that ICON says adds 20% of damping force to help prevent harsh bottom outs.
The kit is a rear kit. Check the included positions against your vehicle before installing. For a more user defined tune, CDCV or OMEGA Series bypass shocks are an option.
Key features
- 2-3 inch 2.5 VS Series piggyback reservoir shock kit
- Sold as a pair with all required hardware
- Configured for each application in length and damping tune
- 100% rebuildable and 100% revalveable
- 6061 billet aluminum manifold with internal Bump Zone
- Gas charged
Reservoir shock installation and care
Remote reservoir shocks change the packaging of a suspension. The reservoir hangs from its own bracket, so routing, clearance and mounting angle need checking before the vehicle is lowered. Check that the reservoir does not rub the frame, sway bar links or tires at full compression and full extension.
Gas-charged shocks help keep the damping consistent under hard use, which matters on rough trails. Over time seals and bushings wear, and a leaking shock or a noisy mount is a sign to inspect. Rebuildable designs allow new seals, oil and bearings to be fitted, which can extend service life.
Lifted trucks often need an alignment after shock work, and tire wear should be checked after the first drives. A pair should be replaced together to keep the ride even from side to side. Keep the mounting hardware with the shocks, and re-check the bolts after initial driving.
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 217701P |
| UPC | 70000750485 |
| Product type | Piggyback reservoir shock kit |
| Shock series | 2.5 Piggyback Reservoir (V.S. 2.5 Series) |
| Lift | 2-3 inch |
| Gas charged | Gas charged |
| Manifold | 6061 billet aluminum |
| Quantity | Pair |
| Fit type | Direct fit |
| Included | All required hardware |
Vehicle fitment
Piggyback reservoir shocks add bulk beside the shock body, so this work suits a trained installer. Secure the vehicle on rated stands first.
Give the reservoirs room away from brake lines, wiring and tires, and check that they clear the frame and body through full travel.
Installation notes
Piggyback reservoir shocks add bulk beside the shock body, so plan for a trained installer and secure the vehicle on rated stands first.
- Give the reservoirs room away from brake lines, wiring and the tires.
- Tighten fasteners to the specified torque and re-check them early in use.
- Get an alignment after the work and check the driveline at full extension.
What’s included
- Pair of shocks
- All required hardware

