Overview
The Icon Suspension V.S. 2.5 Series rear shock, part number 217715CP, is a piggyback reservoir shock for Dodge and Ram 1500 trucks with 0 to 3 inches of lift. It is sold in pairs. The listed fitment covers 2009–2010 Dodge Ram 1500 models and 2011–2017 Ram 1500 models in the trims shown in the fitment section below.
The V.S. 2.5 Series shocks are configured for each application in length and damping tune. The piggyback reservoir is designed to improve heat dissipation, which helps reduce shock fade during extended use. An internal Bump Zone, built into a 6061 billet aluminum manifold near the top cap, adds about 20% more damping force as the shock nears full compression.
Key features
- Piggyback reservoir with improved heat dissipation
- CDC valve with 10 levels of compression damping, adjusted with an external knob
- Internal Bump Zone adds 20% damping force near full compression
- Nitrogen charged monotube design
- 7/8 inch induction hardened, chrome plated shock shaft
- CAD plated, precision machined 1026 DOM steel shock body
- PTFE lined spherical bearings and application specific mounting hardware
- 100% rebuildable and 100% revalveable
Choosing a rear setup
Rear shocks on a half ton truck carry bed load and trailer tongue weight as well as road bumps, so their damping affects both ride and control. A piggyback reservoir separates the oil reserve from the shock body, which helps manage heat during repeated compression. Shocks like this are usually replaced in pairs so both rear sides respond the same way.
Think about how you use the truck before choosing a damping setting. Firmer valving can help when the bed carries weight, while a softer setting suits unloaded daily driving. Check spring and bump stop condition at the same time, since worn springs change the load on a new shock. Inspect the body for oil streaks and the mounting bushings for cracks, and replace the pair if the ride feels loose over bumps.
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 217715CP |
| UPC | 70000750523 |
| Series | V.S. 2.5 Series |
| Position | Rear |
| Lift range | 0 to 3 inches |
| Quantity | Sold in pair |
| Body | Nitrogen charged monotube with piggyback reservoir |
| Shaft | 7/8 inch diameter, induction hardened, chrome plated |
| Shock body | CAD plated 1026 DOM steel |
| Manifold | 6061 billet aluminum |
| Damping oil | Premium grade 5WT |
| Bushings | Polyurethane |
| Mounting stems | Forged steel |
| Bearings | PTFE lined spherical |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2009 to 2010 Dodge Ram 1500 in the Laramie, SLT, ST, Sport, TRX and TRX4 trims, and 2011 to 2017 Ram 1500 in the Big Horn, Express, HFE, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, R/T, Rebel, SLT, ST, Special Service, Sport, Tradesman and Tradesman HD trims.
It does not fit 2018 and later Ram 1500 models, or Ram 2500 and 3500 trucks. Check fit against your year, model and trim before ordering.
Installation notes
Check the lift on your truck against the 0 to 3 inch range before installation, because damping and length are set per application. The piggyback reservoir takes up space along the body, so confirm clearance for it on your truck. Work on the rear suspension with the truck supported on stands.
What’s included
Sold in pair, with application specific mounting hardware and PTFE lined spherical bearings. Check the package contents against your installation before starting.
