Overview
The Icon Suspension 216532 is a rear shock absorber for Ram air ride trucks, from the Vehicle Specific 2.0 Aluminum Series. The published fitment for this part names the 2014–2017 Ram 2500 trims in the fitment section below.
Icon presents the V.S. 2.0 as a high quality upgrade for owners who drive daily and also use their truck off-road. Icon engineers valve the shock for its application, and it can be rebuilt and revalved, so the valving can be changed later if your use changes.
Key features
- Nitrogen charged monotube design with an internal reservoir
- One piece linear/digressive piston with vehicle specific valving
- Premium grade 5WT shock oil for steady damping over a wide temperature range
- Chrome plated 5/8 in hardened steel shaft that resists corrosion and pitting
- 6061 aluminum rod end, top cap and internals for strength
- 6063 anodized aluminum body for heat dissipation and a high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable and 100% revalveable
Air ride shock care
Air ride trucks depend on the shock working together with the air springs, so shocks affect ride height and comfort on a different scale than coil setups. Watch for uneven rear height, a bouncy ride after bumps, and oil on the shock body. Because the air system controls height, inspect the rear mounts and bushings for wear whenever the shock is removed.
A replacement air ride shock should keep the same mounting points and travel range as the factory unit. After installation, check that the air system holds level height and that the truck rides evenly on both sides. Consider inspecting the air springs and lines during the same service, since worn air components can make a new shock feel wrong.
- Check air springs and lines during the same service
- Confirm rear height holds level after installation
- Inspect mounting bushings when the shock is removed
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 216532 |
| UPC | 700007749321 |
| Position | Rear |
| Application | Air ride suspension |
| Fitment | Direct fit |
| Shaft | 5/8 in chrome plated hardened steel |
| Rod end, top cap and internals | 6061 aluminum |
| Body and reservoir tubing | 6063 anodized aluminum |
| Bushings | Polyurethane |
| Sleeves | Zinc plated |
| Mounting stems | Forged steel |
| Shock oil | Premium grade 5WT |
| Charge | Nitrogen, monotube |
| Rebuildable and revalveable | Yes and yes |
Vehicle fitment
It fits the 2014–2017 Ram 2500 in the trims below.
- 2014–2017 Ram 2500 (Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT, Tradesman)
The Ram 3500 is not in the published fitment for this part, and neither are Ram 2500 model years outside 2014–2017. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is an air ride application, so confirm that your truck has air ride suspension before ordering. Replacing a rear shock on an air ride truck should be done by a qualified technician who can check the ride height settings afterward.
What’s included
Check the package contents against your installation before starting.