Overview
The Icon Suspension 216530 is a front shock absorber from the Vehicle Specific 2.0 Aluminum Series, made for Ram 2500 and Ram 3500 trucks with a 4.5 inch lift. It fits the 2014–2017 Ram 2500 and the 2013–2017 Ram 3500 trims covered in the fitment section below.
This shock is a cost effective upgrade for street driving and weekend off-road use. Each unit is tailored to its application, and it can be rebuilt and revalved later. Icon also makes the V.S. 2.5 Series for owners who run in extreme off-road conditions.
Key features
- Nitrogen charged monotube body with an internal reservoir
- One piece linear/digressive piston with vehicle specific valving
- Premium grade 5WT shock oil for steady damping across a wide temperature range
- 5/8 in chrome plated hardened steel shaft that resists corrosion and pitting
- 6063 anodized aluminum body and reservoir tubing for heat dissipation and corrosion resistance
- Polyurethane bushings, zinc plated sleeves and forged steel mounting stems for OE type fitment
- Nitrile rubber top out bumper for quiet operation
- 100% rebuildable and 100% revalveable
Choosing a valving setup
Valving controls how quickly a shock resists movement, which changes how a truck feels on pavement and on trails. A softer setup suits daily street driving, while firmer valving helps with heavier loads and rough terrain. Shocks that can be revalved give owners room to adjust the feel later, rather than replacing the whole unit when use changes.
Choose the setup based on how the truck is used most of the time. A daily driver may prefer a comfortable ride, while a truck that carries loads or runs trails regularly may need firmer damping. Front shocks work with the steering system, so check tie rod ends, ball joints and control arm bushings before adding a new unit.
- Match valving to daily driving or trail use
- Check ball joints and tie rod ends
- Revisit valving if the truck’s use changes
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 216530 |
| UPC | 700007573761 |
| Position | Front |
| Fitment | Direct fit |
| Lift height | Designed for trucks with a 4.5 inch lift |
| Shaft | 5/8 in chrome plated hardened steel |
| Rod end and top cap | 6061 aluminum |
| Body and reservoir tubing | 6063 anodized aluminum |
| Mounting stems | Forged steel |
| Bushings | Polyurethane |
| Sleeves | Zinc plated |
| Top out bumper | Nitrile rubber |
| Shock oil | Premium grade 5WT |
| Charge | Nitrogen, monotube |
| Rebuildable and revalveable | Yes and yes |
Vehicle fitment
The shock fits these vehicles, with the trims named in each entry.
- 2014–2017 Ram 2500 (Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT, Tradesman)
- 2013–2017 Ram 3500 (Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST, Tradesman)
Ram 1500 trucks and Ram 2500 or 3500 model years outside the ranges above are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Because the valving is set for a 4.5 inch lift, confirm your truck’s lift height before ordering. Shock replacement on a lifted truck should be done by a qualified technician, who can check ride height and the front end after the work.
What’s included
Check the package contents against your installation before starting, including any mounting hardware you need.


