Leveling kit vs lift kit explained: factory rake, spacers and torsion keys, tire sizes at 2 to 3 inches, CV angles, towing, load leveling…
Lift Kits
Showing 625–636 of 1736 resultsSorted by popularity
-
Lift Kits
Fabtech 4″ Lift Kit with Rear Performance Shocks – K2386
- 4-inch lift with rear performance shocks for 2021–2026 Ford F-150 trucks
- Built for 35-inch tires; Fabtech performance shocks front and rear included
- 1/4-inch steel high arched crossmembers and a 1/4-inch skid plate
- Restrictions: SuperCrew bodies only, gas models only, no Raptor or hybrid
SKU: FABK2386 -
Lift Kits
Fabtech 4 Inch Performance System with Dirt Logic Resi Shocks – K1141DL
- 4-inch lift on top of the factory 2-inch lift for Chevrolet Silverado 1500 Trail Boss and GMC Sierra 1500 AT4
- Allows 35-inch tires
- Stainless steel Dirt Logic 2.5 coilovers with remote reservoirs
- Part number K1141DL
SKU: FABK1141DL -
Lift Kits
Fabtech 4 Inch Performance Lift Kit with Dirt Logic Remote Reservoir Shocks – K1178DL
- 6-to-7-inch IFS lift for 2019–2020 Chevrolet Silverado 1500 and 2019–2021 GMC Sierra 1500 trucks
- Dirt Logic 2.5 stainless coilovers in front and Dirt Logic 2.25 shocks at the rear
- Built for 2WD trucks; 5-inch rear block and U-bolt system
- Free 5-year, 60,000-mile powertrain warranty.
SKU: FABK1178DL -
Lift Kits
Fabtech 4 Inch Performance Lift Kit with Dirt Logic Remote Reservoir Shocks – K1176DL
- 6-inch to 7-inch lift for 2019–2026 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks
- Dirt Logic 2.5 stainless coilovers that provide 6 inches of lift
- Independent front suspension with zero bump steer.
- 5-inch rear block and U-bolt system with Dirt Logic 2.25 rear shocks
SKU: FABK1176DL -
Lift Kits
Fabtech 4 Inch Performance Lift Kit with Dirt Logic Remote Reservoir Shocks – K1174DL
- 4-inch lift for 2019–2020 and 2022 Chevrolet Silverado 1500 Trail Boss and 2019–2026 GMC Sierra 1500 AT4 trucks
- Dirt Logic 2.5 front coilovers and Dirt Logic 2.25 rear shocks
- Near stock track width with heavy duty crossmembers and triple front differential mounts
- Rear lift with a 5-inch block and U-bolt system
SKU: FABK1174DL -
-
-
Lift Kits
Fabtech 3″ Uniball Upper Control Arm System with Front Dirt Logic 2.5 Coilovers and Rear 2.25 Resi Shocks – K7081DL
Lift KitsFabtech 3″ Uniball Upper Control Arm System with Front Dirt Logic 2.5 Coilovers and Rear 2.25 Resi Shocks – K7081DL
- Fabtech 3 in. Uniball upper control arm system with Dirt Logic 2.5 coilovers, part number FABK7081DL
- Rear Dirt Logic 2.25 shocks and dual rate rear coil springs
- 10 in. front and 9 in. rear wheel travel.
- Fits 2010 to 2021 Toyota 4Runner
SKU: FABK7081DL -
Lift Kits
Fabtech 3″ Uniball Upper Control Arm Lift Kit with Shock Spacers – K2383
- Fabtech 3 inch Uniball upper control arm lift kit with shock spacers, part number K2383
- Built for 35 inch tires on the 2021–2026 Ford Bronco
- Uniball upper control arms with extra caster
- Track bar relocation bracket re-centers the rear axle
SKU: FABK2383 -
Lift Kits
Fabtech 3″ Sport Lift Kit with Shock Extensions – K4159
- 3-inch Sport lift kit with shock extensions for 2020–2026 Jeep Gladiator models
- Dual rate American made front coil springs and rear coil spring spacers
- Four bump stop extensions and extended, urethane bushed sway bar links
- Installs in a couple of hours
SKU: FABK4159 -
Lift Kits
Fabtech 3″ Ball Joint UCA Lift Kit with Rear Stealth Shocks – K1059M
- 3-inch ball joint upper control arm lift with Stealth rear shocks
- Fits 2007–2015 and 2017–2018 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks
- Clearance for 33-inch tires with thick wall DOM tubular arms and extended range ball joints
- 1/4-inch steel skid plate and relocated front differential
SKU: FABK1059M
What a lift kit includes
A lift kit is a bundle of parts that raises the body or frame relative to the axles. Listings in this category show how much the contents vary. Some kits are little more than spacers and bump stops, while others add replacement coil springs, extended sway bar links, track bar brackets, steering drop components and matched shocks.
Lift height is the headline number, but it is only part of the story. A kit sold as 3.5 inch, 4 inch or 6 inch describes nominal lift, and the actual change depends on the vehicle, tire size and how much it sags with weight.
Short arm, long arm and spacer designs
Design matters more than height. Common types you will see here:
- Spacer and strut kits raise the ride height cheaply and keep factory geometry, which suits moderate lifts.
- Short arm kits keep the factory control arm mounting points and replace springs, arms and shocks. They are simple to install and work well for daily drivers.
- Long arm and 4-link kits relocate the arm mounts with crossmembers, giving better articulation and a flatter arm angle at the cost of more complex installation.
- Radius arm and drop bracket kits are common on solid-axle trucks and corrected geometry varies by model.
Kits with a stage or number in the name usually add components step by step, so read the contents list rather than assuming two kits of the same height are equivalent.
Shocks and geometry correction
Raising a vehicle changes control arm angles, driveline angles and steering geometry. Good kits include correction parts such as caster-correcting bushings, cam bolts for pinion angle, drop brackets, a high steer or drag link, and extended brake lines. If a kit leaves these out, plan to buy them separately.
Shocks are either included or sold separately. Twin tube, monotube and reservoir shocks differ in heat handling and ride feel. Confirm the shock lengths suit the lift height, since a shock that is too short can limit travel and one that is too long can bottom the bump stops.
Installation and compatibility
Lift kits are vehicle specific. Confirm fitment for your exact year, make, model, cab or door configuration, drivetrain (2WD or 4WD) and engine, then compare against the manufacturer's specifications. Part numbers often change between model years.
Suspension, steering and brake line work is safety critical. Professional installation is a sound choice unless you have the tools and experience, and every fastener should be tightened to the specified torque with the vehicle at ride height. Plan on an alignment after the lift, plus a check of headlight aim, speedometer calibration if you change tire size, and driveshaft angles.
Lift height, bumper height and tire rules vary by state, so check local regulations.
Maintenance and common mistakes
A lifted suspension needs more attention than a stock one. Recheck every suspension bolt after the first 100 miles or so, because bushings settle and fasteners can lose torque. Grease any fittings on control arms and ball joints on the schedule the manufacturer gives, and inspect bump stops, shock mounts and brake lines at each oil change.
- Do not pick a lift height first and shop for parts second. Start with the tire size you want and the use you have in mind.
- Do not skip extended brake lines or a driveshaft check on taller lifts.
- Do not mix leftover parts from different kits, since spring rates and arm lengths are matched within a kit.
- Remember that a taller vehicle behaves differently in corners and in emergency maneuvers, so adjust your driving.
Related guides
- Leveling Kit vs Lift Kit: What 3 Inches Really Gets You
- The XJ Cherokee 4.5-Inch Lift: What a Complete Kit Needs
A complete XJ 4.5 lift needs coils, leaf springs, control arms, a track bar, shocks and brake lines. See the parts, axle limits and…
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Lift Kits brands
- Pro Comp Suspension (613)
- Rubicon Express (338)
- Fabtech (162)
- Rough Country (98)
- Tuff Country (90)
- Skyjacker (80)
- TeraFlex (64)
- Daystar (62)
- ReadyLift (59)
- Trail Master (40)
- Genuine Packages (26)
- ARB 4x4 Accessories (24)
Lift Kits FAQ
How much lift do I need for 35 inch tires?
It depends on the vehicle, backspacing and trimming. Many solid-axle vehicles clear 35s with about 3.5 to 4 inches of lift plus some trimming, while independent front suspension trucks vary. Check the kit manufacturer's tire size guidance for your exact model.
Do I need an alignment after installing a lift kit?
Yes. Changing ride height alters caster, camber and toe, so an alignment is required after installation. Headlight aim and driveline angles should also be checked, and a high steer or geometry correction parts may be needed.
Is a long arm kit better than a short arm kit?
Long arm kits generally improve articulation and geometry at taller lifts but cost more and are harder to install. Short arm kits are simpler and fine for moderate lifts and mostly street use.
Will a lift kit affect my ride and fuel economy?
Usually yes. A taller, heavier setup raises the center of gravity and increases drag, and bigger tires add weight and rolling resistance. Quality shocks and correct alignment help the ride but cannot fully offset those changes.















