Overview
The Fabtech 3 in. Uniball Upper Control Arm System with Front Dirt Logic 2.5 Coilovers and Rear 2.25 Resi Shocks, part number FABK7081DL, is a suspension package for the Toyota 4Runner. It adds a 3 in. lift and wheel travel while keeping the lift height low, and it fits 2010 to 2021 models in several trims.
The upper control arms are tubular chromoly with stainless steel uniballs. The uniball ends attach to the factory spindle without drilling. The arms work with the Dirt Logic 2.5 coilovers, which use cold wound coil springs and provide 10 in. of front wheel travel.
At the rear, Fabtech uses dual rate coil springs. The first stage is supple at lower speeds and allows more travel over large obstacles, and the second stage stiffens to carry more load and ride better at higher speed. The rear Dirt Logic 2.25 shocks use a remote reservoir, which Fabtech says allows the full stroke of the shock and provides 9 in. of travel.
The package suits owners who want more suspension performance at a low lift height and who use the vehicle as a daily driver, for overlanding and weekend trail use.
Key features
- Tubular chromoly upper control arms
- 1 in. stainless steel uniballs that attach to the factory spindle without drilling
- Front Dirt Logic 2.5 coilovers with cold wound springs, 10 in. of travel
- Rear dual rate coil springs
- Rear Dirt Logic 2.25 shocks with a remote reservoir, 9 in. of travel
- Fits 2010 to 2021 Toyota 4Runner
Choosing a mild lift setup
A mild lift is meant to add wheel travel without a large change in height. Coilovers and shocks do most of the work in that trade, so their length and damping need to match the new ride height. Shocks that are too short or too stiff can limit travel even when the arms are installed correctly.
On a 4Runner that is used both daily and off road, the rear springs and shocks should move together. Dual rate springs soften the first stage of travel while stiffening later, so inspect the shock mounts and bushings for wear after the install.
Plan for the other parts that a lift often disturbs, such as brake lines, sway bar links and the driveline. Check them for clearance at full travel, and keep the alignment checked as the suspension settles in.
- Check shock mounts and bushings for wear
- Confirm clearance for brake lines and sway bar links
- Recheck alignment after the suspension settles
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABK7081DL |
| Lift | 3 in. suspension lift kit |
| Front shocks | Dirt Logic 2.5 coilovers |
| Rear shocks | Dirt Logic 2.25 |
| Rear springs | Dual rate coil springs |
| Front wheel travel | 10 in. |
| Rear shock travel | 9 in. |
| Fit | Direct fit |
Vehicle fitment
The system fits 2010 to 2021 Toyota 4Runner models, including Limited, Nightshade, SR5, SR5 Premium, TRD Off-Road, TRD Off-Road Premium, Trail and Venture trims.
Other Toyota models, and 4Runner years outside 2010 to 2021, are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 3 in. lift changes the driveline angles and axle alignment, so have both checked after installation. Confirm the uniball and coilover hardware is on hand before you start.
What’s included
The upper control arm system, Dirt Logic 2.5 coilovers, rear coil springs and Dirt Logic 2.25 rear shocks.










