Overview
The Fabtech K2263 is a 4-inch performance lift system for the 2017–2020 Ford F-150 Raptor. It raises the Raptor for 37-inch tires while keeping the factory SVT control arms and Fox shocks, which keeps the travel features the truck was built with.
The system uses heavy duty ductile iron knuckles designed for the larger tires, and they work with the Raptor’s electronic stability control and traction control. The factory SVT control arms are relocated with 1/4-inch steel crossmembers rather than replaced, which keeps the arm design while moving it to suit the taller stance. The front differential is relocated to keep the front CV angles correct at the new ride height, and it comes with a 1/4-inch steel skid plate. The factory Fox shocks are retained with front and rear shock extensions. The rear lift is a block and U-bolt set, and the lift range is 4 to 5.5 inches.
Key features
- 4-inch lift that allows 37-inch tires.
- Heavy duty ductile iron steering knuckles
- Factory SVT control arms relocated with 1/4-inch steel crossmembers
- Factory Fox shocks retained with shock extensions
- Front differential relocated, with a 1/4-inch steel skid plate
Off-road use and the front end
The Raptor is built for rough terrain, and a 4-inch lift adds to what the suspension can handle. Relocating the front differential keeps the front CV angles within range, which matters most when the front suspension is working through large travel. The skid plate protects the differential from rocks and debris, so it is worth checking after each off-road trip.
Front-end geometry changes with the lift, so keep the alignment and driveline checks on the regular schedule. Watch for vibration at speed, which can point to driveline angles that need adjustment. Check the steering knuckles and crossmembers for cracks, especially after hard landings or contact with obstacles.
- Inspect the skid plate mounts after off-road trips
- Check CV boots for tears after the first drives
- Re-check alignment after any front suspension work
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2263 |
| Lift height | 4 inches |
| Lift height range | 4 to 5.5 inches |
| Rear lift component | Block and U-bolt |
| Front shocks | Factory Fox shocks retained |
| Skid plate | 1/4-inch steel |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2017–2020 Ford F-150 Raptor.
Standard F-150 models are not covered by this system. Check the year, model and trim against your truck before ordering.
Installation notes
The front differential is relocated to keep the front CV angles correct at the new ride height, so the driveline angles and alignment need to be checked after installation.
What’s included
Steering knuckles, steel crossmembers, shock extensions, the relocated differential skid plate and a rear block and U-bolt lift.










