Overview
The Fabtech K2322 is a 3.5-inch ball joint upper control arm system with rear performance shocks for the 2019–2020 Ford Ranger in Lariat, XL and XLT trims. The rated lift range is 0 to 3.5 inches, and the rear is raised with 1.5-inch blocks and U-bolts. It is a front suspension system designed to add height and room for larger tires without relocating the front differential.
The heavy-duty ball joints allow longer suspension travel without binding. The geometry keeps the CV axle angle and plunge within range, so the front differential does not need to be moved. The system clears 31-inch tires with the factory intrusion beams left in place in the front fenderwell. Those beams are part of the Ranger’s front collision safety system. The rear lift uses 1.5-inch blocks with U-bolts, and the total lift range is 0 to 3.5 inches.
Key features
- Heavy-duty ball joints for extended suspension travel
- Keeps CV axle angle and plunge within range without relocating the front differential
- Allows 31-inch tires with the factory intrusion beams in place
- Rear lift from 1.5-inch blocks and U-bolts
- Performance rear shocks included
Tire clearance and fender room
Tire size is the main decision with this kit. Running 31-inch tires keeps the factory intrusion beams in place, which many owners prefer for the safety system. Larger tires need a different setup, and offset intrusion beams are sold separately as an option for that size. Plan the tire choice before ordering so the right beam setup comes with the kit.
Once the lift is in, the front end needs attention. Changing the ball joint angles alters caster and camber, so set the alignment and check that the tires do not rub at full lock. Look at the inner fender edges and the intrusion beams for contact, especially after off-road trips where flex can push the tire up into the fender.
- Confirm tire diameter and load rating before buying tires
- Check the fender liner for rubbing after the first drive
- Re-check front alignment after any suspension work
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2322 |
| Lift height range | 0 to 3.5 inches |
| Rear lift component | 1.5-inch block and U-bolt |
| Rear shocks | Performance shocks |
| Front shocks | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2019–2020 Ford Ranger in Lariat, XL and XLT trims.
The list does not cover the Ranger from 2021 onward or the 2019–2020 models outside those trims. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The intrusion beams are part of the front collision safety system, and Fabtech says they stay in place for 31-inch tires. Larger 33-inch tires need the optional offset intrusion beams, which replace the factory beams. A lift this size changes alignment, so have the front alignment set after installation.
What’s included
The upper control arm system with ball joints and the rear performance shocks, with rear 1.5-inch blocks and U-bolts.
Not included: Offset intrusion beams for 33-inch tires, which Fabtech sells as an option.










