Overview
The Fabtech 3 inch Uniball upper control arm lift kit with shock spacers, part number K2383, is a 3 inch lift for the 2021–2026 Ford Bronco built for 35 inch tires. It fits the Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak trims.
The factory upper control arms are replaced with Fabtech Uniball arms, which add wheel travel and extra caster compared with stock arms. The extra caster helps balance steering effort with oversized tires. The factory coilover shocks are kept and fitted with spacers, and the rear axle is re-centered with a track bar relocation bracket.
The track bar relocation bracket is needed because the rear axle moves off-center as the vehicle is raised. The bracket re-centers the axle under the vehicle so it tracks straight.
Key features
- 3 inch lift for 35 inch tires
- Uniball upper control arms with extra caster
- Arms made from 1.25 inch OD 4130 chromoly steel
- 1 inch FK stainless PTFE-lined Uniball bearings
- Factory coilover shocks kept with spacers
- Heavy-duty track bar relocation bracket
Tire and wheel fit
Taller tires change how a lift feels and how the steering loads the front end. When a 3 inch lift is paired with larger tires, rubbing at full steering lock and on suspension travel is the first thing to check. Trimming may be needed at the inner fender or liner. Check clearance at full lock and while the suspension compresses before going on trail.
The track bar relocation bracket works with the rear axle geometry, so it should be fitted with the rest of the kit rather than added later. Keep the brake lines and wiring clear of the axle during the install, and recheck rear axle alignment after the first drives. Look for wear in the uniball bearings and track bar mounts during regular inspection.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2383 |
| Lift | 3 inch |
| Lift height range | 0 to 3.5 inches |
| Tire size | 35 inch |
| Upper control arms | 4130 chromoly, 1.25 inch OD |
| Bearings | 1 inch FK stainless PTFE-lined Uniball |
| Rear lift method | Spacer |
| Front shocks | Reuse OEM |
| Rear shocks | Reuse OEM |
| Shocks included | No |
Vehicle fitment
It is a direct fit for the 2021–2026 Ford Bronco in the Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak trims.
Bronco years outside 2021–2026, and Bronco Sport models, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fabtech lists tire and wheel options for this kit: 35/12.50R17 tires on 179 wheels with 4-1/2 inch backspacing, 35/12.50R18 tires on 189 wheels, and 35/12.50R20 tires on 209 wheels, each with minor trimming. Check the fit of your chosen tire and wheel before installing.
What’s included
Uniball upper control arms, shock spacers and a track bar relocation bracket. The factory shocks are reused with spacers and are not included.














