Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers & Shock Accessories
Showing 313–324 of 902 resultsSorted by popularity
-
Shock Absorbers & Shock Accessories
Pro Comp PRO-X Twin Tube Shock Absorber – 922553B
- Front position for 2014–2021 Ram 2500, 2013–2021 Ram 3500 and 2007–2014 Toyota FJ Cruiser
- 22.7-inch extended length, 13.59-inch collapsed length
- Stem upper mount, loop lower mount
- Twin tube design with 10-stage velocity sensitive valving
- 9.1-inch travel length
SKU: EXP922553B -
Shock Absorbers & Shock Accessories
Pro Comp PRO-X Twin Tube Shock Absorber – 922515B
- Pro Comp PRO-X twin tube front shock absorber, part number EXP922515B, sold individually
- Extended length 22.75 in, collapsed length 13.54 in, travel length 9.21 in
- Nitrogen stabilized body with 10-stage velocity-sensitive valving
- Fits 1997–2003 Ford F-150 and 1999–2003 F-150 Lightning
- 1-3/8 inch nylon banded piston and 5/8 inch chrome hardened shaft
SKU: EXP922515B -
Shock Absorbers & Shock Accessories
Pro Comp PRO-X Twin Tube Shock Absorber – 922510B
- Fits 1980–1996 Ford Bronco and F-150, and 1984–1990 Bronco II
- Also fits Isuzu Pickup and Trooper, Jeep Wrangler YJ and Toyota Tacoma
- 22.8-inch extended length, 13.5-inch collapsed length
- Stem upper mount, loop lower mount
- Twin tube design with 10-stage velocity sensitive valving
SKU: EXP922510B -
Shock Absorbers & Shock Accessories
Pro Comp PRO-X Twin Tube Shock Absorber – 922508B
- Fits 2000–2005 Ford Excursion and F-250 and F-350 Super Duty
- Also fits 1999–2004 Jeep Grand Cherokee WJ and 2005 Grand Cherokee WK
- 22.6-inch extended length, 13.7-inch collapsed length
- Loop upper and lower mounts
- Twin tube design with 10-stage velocity sensitive valving
SKU: EXP922508B -
Shock Absorbers & Shock Accessories
Pro Comp PRO-X Twin Tube Shock Absorber – 922506B
- Pro Comp EXP922506B PRO-X twin tube shock, sold individually
- Fits 1975–1986 Chevrolet C30, 1977–1986 K30, 1979–1986 GMC C3500 and K3500, and 1975–1986 Toyota Pickup
- Gas charged and nitrogen stabilized, with 10 stage velocity sensitive valving
- Shock boot sold separately
SKU: EXP922506B -
Shock Absorbers & Shock Accessories
Pro Comp PRO-X Twin Tube Shock Absorber – 922501B
- Twin tube shock, 22.5 to 22.6 inches extended and 13.7 inches collapsed
- Fits 1992-1994 Chevrolet Blazer, K1500 and Suburban, GMC K1500 and Yukon
- 10-stage velocity sensitive valving
- 5/8-inch chrome hardened shaft and 1-3/8-inch nylon banded piston
- Sold individually; part number 922501B
SKU: EXP922501B -
Shock Absorbers & Shock Accessories
Pro Comp PRO-X Twin Tube Shock Absorber – 922500B
- Pro Comp PRO-X twin tube shock absorber, part number EXP922500B, sold individually
- Extended length 22.5 in, collapsed length 13.7 in, travel length 8.92 in
- Gas charged with nitrogen stabilization and 10-stage velocity-sensitive valving
- Manufacturer fitment list covers 1973–1991 Chevrolet and GMC trucks and SUVs, Ford Bronco and Jeep CJ, Cherokee and Wrangler YJ models
- 1-3/8 inch nylon banded piston and 5/8 inch chrome hardened shaft
SKU: EXP922500B -
Shock Absorbers & Shock Accessories
Pro Comp PRO-X Twin Tube Shock Absorber – 921573B
- Fits 1993 Land Rover Defender 110 and Range Rover County and Range Rover Sport
- 22.9-inch extended length, 13.9-inch collapsed length
- Upper loop mount, lower stem mount
- Twin tube design with 10-stage velocity sensitive valving
- Universal location.
SKU: EXP921573B -
Shock Absorbers & Shock Accessories
Pro Comp PRO-X Twin Tube Shock Absorber – 921515B
- Fits 1999–2006 Silverado 1500 and Sierra 1500 and 2001–2006 HD pickups
- Also fits Jeep Cherokee XJ, Grand Cherokee WJ and WK, Wrangler LJ and TJ
- 21.8-inch extended length, 13.1-inch collapsed length
- Stem upper mount, loop lower mount
- Twin tube design with 10-stage velocity sensitive valving
SKU: EXP921515B -
Shock Absorbers & Shock Accessories
Pro Comp PRO-X Twin Tube Shock Absorber – 921510B
- Pro Comp PRO-X gas charged twin tube shock, 21.8-inch extended length
- Collapsed length 13.1 inches, travel 8.65 inches
- Nitrogen stabilized body with 10-stage velocity sensitive valving
- 5/8-inch chrome hardened shaft and black powder coat finish
- Sold individually; shock boots sold separately
SKU: EXP921510B -
Shock Absorbers & Shock Accessories
Pro Comp PRO-X Twin Tube Shock Absorber – 921506B
- Fits 1986–1989 Toyota 4Runner and 1986–1989 Toyota Pickup
- Gas charged twin tube design, 21.6 in extended length, 8.41 in travel
- 10-stage velocity sensitive valving with a 5/8 in chrome hardened shaft
- Nitrogen stabilized body with a black powder coat finish
- Sold individually; shock boot sold separately
SKU: EXP921506B -
Shock Absorbers & Shock Accessories
Pro Comp PRO-X Twin Tube Shock Absorber – 921502B
- Fits 1975–1980 Chevrolet K10 and K20 and GMC K15 and K1500 pickups
- Also fits 1975–1980 GMC Jimmy and Suburban models
- 21.6-inch extended length, 13.2-inch collapsed length
- Loop upper and lower mounts
- Twin tube design with 10-stage velocity sensitive valving
SKU: EXP921502B
What a shock absorber does
A spring supports the vehicle, but it is the shock absorber that controls how fast the spring moves. Without damping, a vehicle would keep bouncing after every bump. The shock converts that motion into heat by forcing fluid through valving, which keeps the tire planted and the body under control on washboard, ruts and highway seams.
Common shock designs
- Twin-tube: a compact design with an inner and outer tube. It is common on stock-style and light-duty replacements and generally rides smoothly.
- Monotube: a single tube with a separate gas chamber, usually nitrogen charged. It tends to resist fade better under repeated hard use, and larger bores such as 46mm move more fluid.
- Remote reservoir: adds an external reservoir for extra fluid volume and cooling, aimed at fast desert driving and heavy off-road use.
- Coilover and strut assemblies: combine the spring and damper in one unit, common on independent front suspension.
How to choose
Start with lift height, because a shock has to fit the travel your suspension actually has. Compare collapsed length and extended length against your vehicle's specifications; a shock that is too short can limit droop, and one that is too long can bottom out inside its travel. Many listings in this category are matched to a lift range, such as stock height to 1.5 inches or a 3 to 3.5 inch kit, so read that range closely.
Also note the position (front or rear), whether the shock is sold individually or as a set, the mount style (loop, stem or bolt-in), and whether the vehicle has air or electronic suspension, since shocks made for standard suspension generally do not apply to those systems.
Accessories and rebuild parts
Extension brackets, relocation brackets and mount kits help when a lift changes shock geometry or when a larger shock needs a different mounting position. Boots protect the shaft from dirt and rock chips, and rebuild kits replace worn internal wear items on serviceable shocks. Spherical bearings and spacers fit specific eye sizes, so match the bore and hardware to your existing shock.
Installation notes
Support the axle or frame safely before removing a shock, and replace worn bushings and hardware at the same time. Tighten fasteners to the torque specified by the vehicle or shock manufacturer, ideally with the suspension at ride height so the bushings do not bind. Replace shocks in pairs on the same axle for even handling. If you are changing lift height or the suspension geometry, professional installation and an alignment check are sensible. Always confirm fitment for your exact year, make and model before ordering.
Matching shocks to how you drive
A daily driver that sees mostly pavement and graded roads is usually happiest with a well-valved monotube or twin-tube shock that keeps the ride composed and quiet. A weekend trail rig that crawls over rocks benefits from a shock with enough stroke to let the axle droop, while a truck that runs fast across desert washboard may call for larger bodies and added fluid capacity. Heavy loads such as a camper, a winch bumper or a roof tent change the picture again, because added weight makes damping and spring rate more important. Think about your typical load before choosing, and remember that shocks do not replace springs: if the vehicle sags, the springs may need attention before any shock will feel right. Keep notes on your part numbers and the lift height they were chosen for, since that information makes future replacement much easier.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
Popular Shock Absorbers & Shock Accessories brands
- Pro Comp Suspension (198)
- Bilstein (151)
- ICON Vehicle Dynamics (92)
- FOX (87)
- Rancho (77)
- Rough Country (64)
- Fabtech (63)
- Skyjacker (53)
- ARB 4x4 Accessories (21)
- Rubicon Express (18)
- King Shocks (16)
- Trail Master (14)
Shop Shock Absorbers & Shock Accessories by type
- Suspension Strut Assembly (38)
- Shock Absorber Mount (13)
- Multi Shock Bracket (4)
- Shock Absorber Spherical Bearing (3)
- Shock Absorber Monoball Spacer (1)
- Shock Absorber Relocation Bracket (1)
Shock Absorbers & Shock Accessories FAQ
How do I know when shocks are worn out?
Common signs include a bouncy or floaty ride, nose dive under braking, uneven tire wear, fluid leaking down the shock body, and clunking from loose or worn bushings. A bounce test and a visual inspection help, and shocks wear gradually, so many owners replace them in pairs.
Do I need longer shocks after a lift?
Usually yes. A lift increases the distance between the axle and frame, so the shock needs enough extended length to avoid limiting travel. Compare collapsed and extended length with the lift range listed on the product page and with your vehicle's specifications.
What is the difference between monotube and twin-tube shocks?
A monotube uses one tube with a separate gas chamber and generally handles heat better during repeated hard use. A twin-tube uses an inner and outer tube and often rides more softly. The right choice depends on your driving and vehicle.
Are shock absorbers sold individually or in pairs?
It varies by product. Some listings are a single shock, others are a pair or a set for the whole vehicle. Check the sold-as detail on the product page, then confirm the quantity and position before choosing a part.













