Overview
The Pro Comp 922508B is a PRO-X twin tube shock absorber for the 2000–2005 Ford Excursion and the 2000–2005 F-250 and F-350 Super Duty. It also fits the 1999–2004 Jeep Grand Cherokee WJ and the 2005 Grand Cherokee WK in the Laredo and Limited trims. It has a 22.6-inch extended length, a 13.7-inch collapsed length and 8.92 inches of travel.
The PRO-X is a general-purpose twin tube design for trucks and SUVs that spend most of their time on pavement, with occasional off-road use. Pro Comp uses 10-stage velocity sensitive valving to handle a range of road conditions, paired with a 1-3/8-inch nylon banded piston and a 5/8-inch chrome hardened shaft.
Both mounts on this shock are loop eyes, so it is simpler to match to an existing bracket than shocks with stem or clevis ends. The body is 2.0 inches in diameter and finished in black powder coat, and the gas charge is nitrogen stabilized.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Loop eyes at both ends
- Black powder-coated finish
Choosing a shock for heavier loads
Heavier trucks and SUVs put more load on each shock, so damping and body length matter more than on light vehicles. A shock that runs out of travel will bottom out over large bumps, while one with too little compressed room can strain its mounts. Heavy towing or a rear load raises the demand further, and those uses often call for a shock suited to the actual weight the vehicle carries.
When a shock starts to fade, the vehicle tends to bounce after dips, nose dive under braking, and wander in crosswinds. Check for oil seeping from the body, dented bodies, and bushings that have cracked. Shocks are often replaced in pairs on the same axle, and when one is replaced, inspecting the top and bottom mounts and their bushings is a sensible step.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 922508B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 22.6 in |
| Collapsed length | 13.7 in |
| Travel length | 8.92 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Loop |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 2000–2005 Ford Excursion in the Eddie Bauer, Limited, XLS and XLT trims, and the 2000–2005 F-250 and F-350 Super Duty in the Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims. It also fits the 1999–2004 Jeep Grand Cherokee WJ in several trims and the 2005 Grand Cherokee WK in the Laredo and Limited trims.
Super Duty and Excursion model years after 2005, and Grand Cherokee models from 2006 onward, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the 22.6-inch extended and 13.7-inch collapsed lengths against the installed suspension on heavier trucks and SUVs before driving, and confirm the loop eyes match the existing hardware. Confirm the mounting hardware before installation.
What’s included
One twin tube shock with loop eyes at both ends. The optional boot is not included with the shock.
Not included: the optional boot.








