Overview
The Pro Comp PRO-X EXP922500B is a gas charged twin tube shock absorber with a 2.0 inch body, sold individually, for trucks and SUVs that spend most of their time on paved roads with occasional off-road use. Pro Comp positions the PRO-X for general-purpose driving, and the extended lengths in this series are made for lifted trucks.
It fits Chevrolet Blazer, K-series and V-series pickups and Suburbans from 1973 to 1991, GMC Jimmy, K15, K25, K1500 and K2500 models from the same period, Ford Bronco models from 1973 to 1991, the Bronco Sport from 1975 to 1977, the Bronco II from 1984 to 1990, Jeep Cherokee SJ and XJ, CJ5 and CJ7, Grand Cherokee ZJ, Wrangler YJ, and the 1993 to 1998 Nissan Pathfinder. Confirm fit for your vehicle’s year, model and trim before ordering, especially for Wrangler TJ and later models and F-150 pickups.
Key features
- Gas charged, nitrogen stabilized twin tube body
- 10-stage velocity-sensitive valving
- 1-3/8 inch nylon banded piston
- 5/8 inch chrome hardened piston rod
- Teflon rebound stop for a comfortable highway ride
- Extended length of 22.5 inches for lifted trucks
- Black powder coat finish
Working with older shock designs
Shocks for trucks and SUVs from the early 1970s through the early 1990s were built around simpler mounting and valve layouts than many modern units. Because of that, a replacement often needs a close look at the eye or stem style at each end, not just the overall length. A shock that reaches the right extended length can still bind if the mount pin or bushing does not match the bracket it bolts to.
Older vehicles also tend to carry worn bushings, weak springs and aged bump stops, all of which change how a shock works. Replacing the shock alone may leave the ride unsettled if the rest of the front or rear end is worn. Inspect the upper and lower mounts, look for cracked rubber, and check that the spring and axle movement are still controlled before you install new hardware. Keeping the sides of an axle matched gives more predictable handling.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP922500B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged with nitrogen |
| Extended length | 22.5 in |
| Collapsed length | 13.7 in |
| Travel length | 8.92 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 inch nylon banded |
| Piston rod | 5/8 inch chrome hardened |
| Valving | 10-stage velocity sensitive |
| Mounts | Loop ends in the feature list; eyelet ends in the specification sheet |
| Location | Universal |
| Finish | Black powder coat |
| Sold | Individually; shock boot sold separately |
Vehicle fitment
It fits 1973–1991 Chevrolet K10, K20 and K1500 pickups and Suburbans, 1987–1991 Chevrolet V-series pickups and Suburbans, 1973–1991 Ford Bronco, 1984–1990 Ford Bronco II, 1973–1991 GMC Jimmy, GMC K15, K1500, K25 and K2500, 1974–1991 Jeep Cherokee SJ and XJ, 1973–1983 Jeep CJ5, 1976–1986 Jeep CJ7, 1993–1998 Jeep Grand Cherokee ZJ, 1987–1991 Jeep Wrangler YJ, and the 1993–1998 Nissan Pathfinder. Confirm fit for your vehicle’s year, model and trim before ordering.
The list does not include the Jeep Wrangler TJ or later Wrangler generations, the Jeep Liberty, or Ford F-150 pickups, and Chevrolet and GMC entries end in 1991. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The specification sheet lists eyelet mounts at both ends, while the feature list says loop. Compare the mount style with your existing shock hardware before installing, because the mounts decide whether this shock bolts into your current brackets.
What’s included
One Pro Comp PRO-X shock absorber, sold individually.
Not included: the optional shock boot, which is sold separately.









