Overview
The Pro Comp 921502B is a PRO-X twin tube shock absorber for 1975–1980 Chevrolet K10 and K20 pickups and Suburbans, and for GMC K15 and K1500 trucks, including their Suburban versions. It also fits the 1975–1980 GMC Jimmy. It has a 21.6-inch extended length and a 13.2-inch collapsed length, with loop eyes at both ends.
The PRO-X line is built as a general-purpose twin tube design for trucks used mostly on pavement with occasional off-road trips. This version uses 10-stage velocity sensitive valving, a 1-3/8-inch nylon banded piston and a 5/8-inch chrome hardened shaft, all of which Pro Comp presents as suited to ordinary road use with some rougher driving.
The loop-to-loop mounts make this one of the simpler mounting layouts in the PRO-X family. The body is finished in black powder coat, and the gas charge is nitrogen stabilized. The optional shock boot is not part of the shock as sold.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Loop eyes at both ends
- Black powder-coated finish
Working with older trucks
Older K-series trucks often carry worn bushings and original shocks that have lost much of their damping. Replacing the shock alone can make the ride feel uneven if the mounts are loose, so inspect the frame and axle brackets for rust and play before installing.
Loop eyes depend on a bushing that fits the eye snugly. A bushing that is too loose lets the shock knock, and one that is too tight can bind at full travel. Check the fit on both ends and make sure the bolts are tightened once the truck is back at its normal ride height.
- Check bushing sleeves before installing
- Inspect frame and axle brackets for rust
- Replace shocks in pairs on the same axle
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 921502B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 21.6 in |
| Collapsed length | 13.2 in |
| Travel length | 8.41 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Loop |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 1975–1980 Chevrolet K10 in the Cheyenne, Custom Deluxe, Scottsdale and Silverado trims and the K10 Suburban in the Custom Deluxe, Scottsdale and Silverado trims, along with the 1975–1980 Chevrolet K20 and K20 Suburban. On the GMC side it fits the 1975–1978 K15 and K15 Suburban, the 1979–1980 K1500, and the 1975–1980 Jimmy.
Chevrolet and GMC K-series trucks from 1981 onward, and the Silverado 1500 entries of later years, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both mounts are loop eyes, so check the eye diameter against your existing shock before ordering. Compare the 21.6-inch extended and 13.2-inch collapsed lengths with the ride height of your truck.
What’s included
Both ends are loop eyes on this twin tube shock. The boot is a separate optional part.
Not included: the optional boot and any bushings.









