Overview
The Pro Comp 922510B is a PRO-X twin tube shock absorber with a 22.8-inch extended length and a 13.5-inch collapsed length. It fits the 1980–1996 Ford Bronco and F-150, the 1984–1990 Bronco II, the 1993–1995 F-150 Lightning, and a range of compact and mid-size trucks and SUVs, including the Isuzu Pickup and Trooper, the Jeep Wrangler YJ and the Toyota Tacoma.
The PRO-X is a general-purpose twin tube shock for vehicles used mainly on pavement with occasional off-road use. Its 10-stage velocity sensitive valving is designed to work across varied road conditions, and the 1-3/8-inch nylon banded piston and 5/8-inch chrome hardened shaft provide the working core of the shock.
The shock has a stem upper mount and a loop lower mount, a 2.0-inch body and a black powder-coated finish. It is nitrogen stabilized, and the optional shock boot is sold separately from the shock.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Stem upper mount
- Black powder-coated finish
Matching mounts across models
Older trucks and compact SUVs often used a mix of stem and loop mounts, so the upper and lower ends of a replacement shock may not match the original bracket. A stem upper mount with a loop lower mount is common on these platforms, but the bushing size and eye diameter still vary by year. Remove the old shock, measure both ends, and set it beside the new unit before ordering.
Rear shocks on a live axle carry different loads than fronts on an independent setup, so the axle mount is worth inspecting as well. Look for cracked rubber bushings, bent brackets and worn bolts. Replacing the bushings with the shock keeps alignment correct and avoids noise. On a high-mileage truck, consider new hardware at the same time.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 922510B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 22.8 in |
| Collapsed length | 13.5 in |
| Travel length | 9.25 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Stem |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 1980–1996 Ford Bronco, the 1984–1990 Bronco II, the 1980–1996 F-150 and the 1993–1995 F-150 Lightning. It also fits the 1981–1995 and 1988–1992 Isuzu Pickup, the 1984–1996 Isuzu Trooper, the 1987–1995 Jeep Wrangler YJ, and the 2005–2023 Toyota Tacoma in several trims.
Toyota Tacoma models from 1995 to 2004, and Wrangler TJ and later models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The list spans compact trucks, SUVs and full-size pickups, so check the stem upper mount and loop lower mount against the existing bracket for your vehicle. Compare the 22.8-inch extended length with your installed suspension before driving.
What’s included
One twin tube shock with a stem upper mount and loop lower mount. The optional shock boot is sold apart from the shock.
Not included: the optional shock boot.









