Overview
The Pro Comp 921515B is a PRO-X twin tube shock absorber with a 21.8-inch extended length and a 13.1-inch collapsed length. It fits the 1999–2006 Chevrolet Silverado 1500 and GMC Sierra 1500, the HD versions of those pickups for 2001–2003 and 2005–2006, and several Jeep models, including the Cherokee XJ, Grand Cherokee WJ and WK, and Wrangler LJ and TJ.
The PRO-X is a general-purpose twin tube design for vehicles that see mostly paved roads with some off-road driving. The 10-stage velocity sensitive valving is meant to adjust damping across road conditions, and the 5/8-inch chrome hardened shaft works with a 1-3/8-inch nylon banded piston to carry the load.
This shock has a stem upper mount and a loop lower mount, and its body is finished in black powder coat with a 2.0-inch diameter. It is nitrogen stabilized, and the optional shock boot is not included with the shock.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Stem upper mount
- Black powder-coated finish
Long shocks on mixed fleets
A shock with a long extended length is often chosen for trucks and Jeeps with lift kits or longer springs, because the extra length allows the full travel to be used. Shocks that are too long can bottom the suspension or contact the frame, so measure the installed length before ordering. Check the axle and tire clearance at full extension.
Trucks and Jeeps that see mostly pavement benefit from a twin tube design with stable valving, since it keeps damping steady across a range of road surfaces. Replace bump stops and upper mount bushings with the shock if they show wear, and inspect the brackets for cracks after rough trail use.
- Measure installed length before buying
- Check clearance at full extension
- Inspect brackets after off-road trips
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 921515B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 21.8 in |
| Collapsed length | 13.1 in |
| Travel length | 8.65 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Stem |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 1999–2006 Chevrolet Silverado 1500 in several trims, the 2001–2003 and 2005–2006 Silverado 1500 HD, and the 1999–2006 GMC Sierra 1500 in several trims. The 2001–2003 and 2005–2006 Sierra 1500 HD in the SLE and SLT trims is also covered. The Jeep fit covers the 1999–2001 Cherokee XJ, the 1999–2004 Grand Cherokee WJ, the 2005–2006 Grand Cherokee WK, the 2004–2006 Wrangler LJ, and the 1999–2006 Wrangler TJ.
Silverado and Sierra 2500 and 3500 models, and the Wrangler JK, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stem upper mount and loop lower mount should be matched to the existing brackets before installation. Because the list spans both trucks and Jeeps, check the 21.8-inch extended and 13.1-inch collapsed lengths against your suspension before driving the vehicle.
What’s included
This twin tube shock pairs a stem upper mount with a loop lower mount. The shock boot is an optional extra and is not part of this item.
Not included: the optional shock boot.









