Overview
The Pro Comp 921573B is a PRO-X twin tube shock absorber for the 1993 Land Rover Defender 110 Base and the 1993 Range Rover County and County LWB, along with the 1993 Range Rover Sport. It has a 22.9-inch extended length and a 13.9-inch collapsed length, with 9.06 inches of travel.
The PRO-X is a general-purpose twin tube design for vehicles that see mostly paved roads with occasional off-road use. Pro Comp uses 10-stage velocity sensitive valving to adjust damping for varied road conditions, along with a 1-3/8-inch nylon banded piston and a 5/8-inch chrome hardened shaft.
The shock uses an upper loop mount and a lower stem mount, which is a different layout from the stem-over-loop shocks in the same line. It has a 2.0-inch body in black powder coat, and it is nitrogen stabilized. The optional shock boot is not included.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Lower stem mount
- Black powder-coated finish
Before you buy
A shock absorber controls how quickly the spring compresses and rebounds, which affects body control on pavement and stability on trails. Twin tube designs like this one keep the working fluid and gas in one body, which suits everyday driving where heat build-up is moderate. Before buying, measure the existing shock at full extension and full compression. Compare those numbers against the extended and collapsed lengths of the replacement, since a mismatch can bind the suspension or leave the shock bottoming out.
Shocks wear out gradually, so look for fluid leaks down the body, a clunk or knock over bumps, and tires that cup or scallop. Replacing shocks in pairs on the same axle keeps the handling even from side to side. If the vehicle carries a heavier load or larger tires than stock, mention that to the installer, because the damping may need to suit the extra weight. Re-check the mount bolts after the first few trail runs.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 921573B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 22.9 in |
| Collapsed length | 13.9 in |
| Travel length | 9.06 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Loop |
| Lower mount | Stem |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 1993 Land Rover Defender 110 Base, the 1993 Range Rover County and County LWB, and the 1993 Range Rover Sport.
Land Rover models from 1994 onward and any other Defender or Range Rover years are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fitment is narrow, so check the loop upper mount and stem lower mount against the existing hardware, and confirm the 22.9-inch extended length fits your installed suspension before driving.
What’s included
One twin tube shock with a loop upper mount and a stem lower mount. The optional boot is not part of the shock.
Not included: the optional boot.









