Overview
The Pro Comp 922553B is a PRO-X front twin tube shock absorber for the 2014–2021 Ram 2500, the 2013–2021 Ram 3500 and the 2007–2014 Toyota FJ Cruiser. It is a front position unit with a 22.7-inch extended length, a 13.59-inch collapsed length and a 9.1-inch travel length.
The PRO-X is a general-purpose twin tube design for trucks and SUVs that see mostly paved roads with occasional off-road trips. Its 10-stage velocity sensitive valving handles a range of road conditions, and the 5/8-inch chrome hardened shaft and nylon banded piston form the working core.
The shock uses a stem upper mount and a loop lower mount, a 2.0-inch body and a black powder-coated finish. It is nitrogen stabilized, and the boot is an optional item that is not included.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Front position
- Black powder-coated finish
Front suspension considerations
Front shocks do more work during steering and braking than rear units, and heavy front ends on diesel trucks add extra load to the damper. A front shock should be matched to the front spring rate and ride height, so that it keeps the tires planted over washboard roads. Check whether the vehicle has a leveling kit or lift, because added height changes the stroke the shock needs.
Front shocks often wear faster than rear ones, and the telltale signs are a nose-heavy feel when braking, a floating sensation at highway speeds, and uneven front tire wear. Inspect the stem mount and the loop bushing for cracks each time the shock is replaced. Replacing both front shocks together keeps steering response balanced from side to side.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 922553B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Position | Front |
| Extended length | 22.7 in |
| Collapsed length | 13.59 in |
| Travel length | 9.1 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Stem |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 2014–2021 Ram 2500 in the Big Horn, Laramie, Limited, Outdoorsman, Power Wagon, SLT and Tradesman trims, the 2013–2021 Ram 3500 in the Laramie, Lone Star, SLT, ST and Tradesman trims, and the 2007–2014 Toyota FJ Cruiser in the Base and TRD Special Edition trims.
The Ram 1500 and Ram models from 2022 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Front shocks on these trucks and the FJ Cruiser sit in a different location than rear units, so confirm the position before fitting. Check the stem upper mount and loop lower mount, and compare the 22.7-inch extended length with your front suspension height.
What’s included
One front twin tube shock with a stem upper mount and loop lower mount. The optional boot is not part of the shock.
Not included: the optional boot.









