Overview
The Pro Comp PRO-X 921510B is a gas charged twin tube shock absorber with a 21.8-inch extended length and 8.65 inches of travel. It fits several Ford Bronco, Bronco II, F-150, F-150 Lightning and Ranger models, along with the 1990 to 2024 Toyota 4Runner.
The PRO-X line suits vehicles that see mostly paved roads with some off-road use. It uses a general-purpose twin tube body with a 2.0-inch diameter, and it is a universal location part, so it can be used on either side of the vehicle depending on the application.
The 10-stage velocity sensitive valving adjusts damping to keep the ride steady as road conditions change. The 5/8-inch chrome hardened piston rod and Teflon rebound stop make highway driving comfortable and hold up to harder use.
Key features
- Gas charged twin tube design
- Nitrogen stabilized body
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft with a Teflon rebound stop
- Black powder coat finish
Choosing the right shock length
Shock length decides how much of the suspension travel the shock can use before it runs out of stroke. A longer extended length can suit a truck with added height, but it only works when the collapsed length still lets the suspension settle at normal ride height. Measuring the installed length of the shock being replaced gives a useful baseline, and the new unit should fit within that same space at both the top and bottom of its travel.
Other parts often change at the same time. Bump stops, springs and mount bushings all affect how far the shock travels and how it is loaded. When a lift or new tires are added, check that the shock still has room at full compression. Replacing shocks in matched pairs on the same axle keeps the ride and steering even, which is especially useful on a truck that sees both pavement and trail.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 921510B |
| Shock series | PRO-X |
| Type | Twin tube, gas charged |
| Location | Universal |
| Extended length | 21.8 inches |
| Collapsed length | 13.1 inches |
| Travel | 8.65 inches |
| Body diameter | 2.0 inches |
| Piston | 1-3/8-inch nylon banded |
| Shaft | 5/8-inch chrome hardened |
| Valving | 10-stage velocity sensitive |
| Finish | Black powder coat |
| Quantity | Individual shock |
Vehicle fitment
It fits 1980 to 1996 Ford Bronco and F-150, 1984 to 1990 Ford Bronco II, 1993 to 1995 Ford F-150 Lightning, 1983 to 1996 Ford Ranger, and 1990 to 2024 Toyota 4Runner. Confirm fit for your vehicle’s year, model and trim before ordering.
It does not cover other Ford or Toyota models, or years outside those ranges. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pro Comp’s mount details for this shock do not agree: one place lists stem top and loop bottom, another lists eyelets at both ends. Confirm the upper and lower mount styles for your truck before ordering.
What’s included
One shock absorber, sold as an individual unit.
Not included: shock boots, which are an optional accessory.









