Overview
The Pro Comp PRO-X twin tube shock absorber, part number EXP921506B, is a gas charged shock with a 21.6-inch extended length, made for trucks that spend most of their time on pavement with occasional off-road use. Pro Comp offers it in extended lengths for lifted vehicles, and it is sold individually.
It is a general-purpose twin tube shock with velocity sensitive valving. That valving changes damping with how fast the shock moves, so the response differs on small bumps and on larger hits such as washboard sections or sharp impacts. The 5/8-inch chrome hardened shaft and Teflon rebound stop keep the ride controlled on the highway and on rougher trail sections. The body is nitrogen stabilized and finished in black powder coat.
The mount style is listed two ways: the short spec list says loop ends at both ends, while the detailed specs say eyelet. Compare the mount style with your existing brackets before you install it.
Key features
- Twin tube design for general paved-road use with occasional off-road driving
- 10-stage velocity sensitive valving that adjusts to different road conditions
- 1-3/8 in nylon banded piston and 5/8 in chrome hardened piston rod
- Teflon rebound stop for a comfortable highway ride
- Nitrogen stabilized, gas charged body
- Black powder coat finish
Matching a shock to mixed use
A shock controls how the spring and the tire move after a bump, and that control matters more on a truck that alternates between highway miles and rough tracks. A valve set that responds to shaft speed can keep small road irregularities from feeling harsh while still resisting the larger motions that come with washboard and landing impacts. Mixed-use trucks benefit from that kind of balance because the same damping has to handle a steady cruise and a sudden jolt.
Before choosing a shock for this type of use, look at how the truck is loaded and how often it sees rough ground. Heavier cargo or a roof rack changes the load on each shock, and a shock that feels right empty can feel soft when the truck carries gear. Consider the mount style and the extended and collapsed lengths together, since a shock that reaches full extension without bottoming out is better suited to a truck with added height.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP921506B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged, nitrogen stabilized |
| Extended length | 21.6 in (21.63 in in the detailed specs) |
| Collapsed length | 13.2 in |
| Travel length | 8.41 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Piston rod | 5/8 in chrome hardened |
| Valving | Velocity sensitive, 10 stage |
| Finish | Black powder coat |
| Location | Universal |
Vehicle fitment
It fits the 1986–1989 Toyota 4Runner and the 1986–1989 Toyota Pickup. Confirm fit for your vehicle’s year, model and trim before ordering.
Model years outside 1986–1989 and other Toyota models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, sold individually.
Not included: the shock boot, which is sold separately.









