Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers & Shock Accessories
Showing 205–216 of 902 resultsSorted by popularity
-
Shock Absorbers & Shock Accessories
Rancho RS7MT Monotube Front Shock Absorber – RS77331
- Rancho RS7MT front monotube shock for 2007–2018 Jeep Wrangler JK, two- and four-door
- Suited to models with a 3.5 to 4-inch lift
- Compressed 17 inches, extended 26.61 inches, travel 9.61 inches
- Part number RANRS77331
SKU: RANRS77331 -
Shock Absorbers & Shock Accessories
Rancho RS7MT Monotube Front Shock Absorber – RS77326
- Rancho RS7MT front monotube shock for 2007–2018 Jeep Wrangler JK, two- and four-door
- Suited to models with a 0 to 2-inch lift
- Compressed 15.24 inches, extended 23.42 inches, travel 8.18 inches
- Part number RANRS77326
SKU: RANRS77326 -
Shock Absorbers & Shock Accessories
Rancho RS7MT Monotube Front Shock Absorber – RS77150
- Rancho RS7MT front monotube shock for models with no lift
- Covers 1988–2000 GM K-series trucks, Tahoe, Yukon, Blazer and Astro models
- Compressed 11.54 inches, extended 16.46 inches, travel 4.92 inches
- Part number RANRS77150
SKU: RANRS77150 -
Shock Absorbers & Shock Accessories
Rancho RS7MT Monotube Front Shock Absorber – RS77067
- Rancho RS7MT front monotube shock for 2018–2026 Jeep Wrangler JL and 2020–2026 Gladiator
- Wrangler JL with 3.5-inch or 4.5-inch lift; Gladiator with 1.5 to 3-inch lift
- Compressed 18.39 inches, extended 28.58 inches, travel 10.19 inches
- Part number RANRS77067
SKU: RANRS77067 -
Shock Absorbers & Shock Accessories
Rancho RS7MT Monotube Front Shock Absorber – RS77065
- Rancho RS7MT front monotube shock for 2018–2026 Jeep Wrangler JL and 2020–2026 Gladiator
- Wrangler JL with 2-inch, 3.5-inch or 4.5-inch lift; Gladiator with 1.5 to 3-inch lift
- Compressed 17.4 inches, extended 26.65 inches, travel 9.25 inches
- Part number RANRS77065
SKU: RANRS77065 -
-
-
Shock Absorbers & Shock Accessories
Rancho RS7000MT Monotube Shock – RS7262
- Rear RS7000MT monotube shock for many 1994–2019 Chevrolet, GMC and Dodge Ram trucks and SUVs
- 46mm bore, 14mm hardened steel rod, high pressure nitrogen gas charge
- For vehicles without air leveling, electronic suspension, Z95 Magnetic Ride Control or GM Auto Track
- 90-Day Free Ride Offer and Limited Lifetime Warranty
SKU: RANRS7262 -
Shock Absorbers & Shock Accessories
Rancho RS7000MT Monotube Shock – RS7008
- Rancho RS7000MT monotube shock, part number RS7008, front position
- Gas charged with high pressure nitrogen and ten stage velocity sensitive valving
- 1.97 inch (50 mm) body diameter with a 14 mm chrome rod
- Fits 1994–2001 Dodge Ram 1500, 1994–2002 Dodge Ram 2500 and 1989–1994 Isuzu Amigo and Pickup
SKU: RANRS7008 -
-
Suspension Strut Assembly
Rancho RS5000X Series Suspension Strut – RS55827
- Rancho RS5000X Series front shock for 2004–2008 INFINITI QX56, 2005–2015 Nissan Armada and 2005–2015, 2017–2019 Nissan Titan
- Compressed 10.80 inches, extended 14.63 inches, travel 3.83 inches
- Progressive engagement valving with a 16 mm rod and 35 mm bore
- Part number RANRS55827
SKU: RANRS55827 -
Suspension Strut Assembly
Rancho RS5000X Series Suspension Front Strut Assembly – RS55845
- Rancho RS5000X Series front strut assembly for 2019–2021 Chevrolet Silverado and GMC Sierra 1500
- Stock height front strut, excludes Trail Boss and AT4 models
- Includes Rancho’s Limited Lifetime Warranty and 90-day Performance Guarantee
- Part number RANRS55845
SKU: RANRS55845
What a shock absorber does
A spring supports the vehicle, but it is the shock absorber that controls how fast the spring moves. Without damping, a vehicle would keep bouncing after every bump. The shock converts that motion into heat by forcing fluid through valving, which keeps the tire planted and the body under control on washboard, ruts and highway seams.
Common shock designs
- Twin-tube: a compact design with an inner and outer tube. It is common on stock-style and light-duty replacements and generally rides smoothly.
- Monotube: a single tube with a separate gas chamber, usually nitrogen charged. It tends to resist fade better under repeated hard use, and larger bores such as 46mm move more fluid.
- Remote reservoir: adds an external reservoir for extra fluid volume and cooling, aimed at fast desert driving and heavy off-road use.
- Coilover and strut assemblies: combine the spring and damper in one unit, common on independent front suspension.
How to choose
Start with lift height, because a shock has to fit the travel your suspension actually has. Compare collapsed length and extended length against your vehicle's specifications; a shock that is too short can limit droop, and one that is too long can bottom out inside its travel. Many listings in this category are matched to a lift range, such as stock height to 1.5 inches or a 3 to 3.5 inch kit, so read that range closely.
Also note the position (front or rear), whether the shock is sold individually or as a set, the mount style (loop, stem or bolt-in), and whether the vehicle has air or electronic suspension, since shocks made for standard suspension generally do not apply to those systems.
Accessories and rebuild parts
Extension brackets, relocation brackets and mount kits help when a lift changes shock geometry or when a larger shock needs a different mounting position. Boots protect the shaft from dirt and rock chips, and rebuild kits replace worn internal wear items on serviceable shocks. Spherical bearings and spacers fit specific eye sizes, so match the bore and hardware to your existing shock.
Installation notes
Support the axle or frame safely before removing a shock, and replace worn bushings and hardware at the same time. Tighten fasteners to the torque specified by the vehicle or shock manufacturer, ideally with the suspension at ride height so the bushings do not bind. Replace shocks in pairs on the same axle for even handling. If you are changing lift height or the suspension geometry, professional installation and an alignment check are sensible. Always confirm fitment for your exact year, make and model before ordering.
Matching shocks to how you drive
A daily driver that sees mostly pavement and graded roads is usually happiest with a well-valved monotube or twin-tube shock that keeps the ride composed and quiet. A weekend trail rig that crawls over rocks benefits from a shock with enough stroke to let the axle droop, while a truck that runs fast across desert washboard may call for larger bodies and added fluid capacity. Heavy loads such as a camper, a winch bumper or a roof tent change the picture again, because added weight makes damping and spring rate more important. Think about your typical load before choosing, and remember that shocks do not replace springs: if the vehicle sags, the springs may need attention before any shock will feel right. Keep notes on your part numbers and the lift height they were chosen for, since that information makes future replacement much easier.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
Popular Shock Absorbers & Shock Accessories brands
- Pro Comp Suspension (198)
- Bilstein (151)
- ICON Vehicle Dynamics (92)
- FOX (87)
- Rancho (77)
- Rough Country (64)
- Fabtech (63)
- Skyjacker (53)
- ARB 4x4 Accessories (21)
- Rubicon Express (18)
- King Shocks (16)
- Trail Master (14)
Shop Shock Absorbers & Shock Accessories by type
- Suspension Strut Assembly (38)
- Shock Absorber Mount (13)
- Multi Shock Bracket (4)
- Shock Absorber Spherical Bearing (3)
- Shock Absorber Monoball Spacer (1)
- Shock Absorber Relocation Bracket (1)
Shock Absorbers & Shock Accessories FAQ
How do I know when shocks are worn out?
Common signs include a bouncy or floaty ride, nose dive under braking, uneven tire wear, fluid leaking down the shock body, and clunking from loose or worn bushings. A bounce test and a visual inspection help, and shocks wear gradually, so many owners replace them in pairs.
Do I need longer shocks after a lift?
Usually yes. A lift increases the distance between the axle and frame, so the shock needs enough extended length to avoid limiting travel. Compare collapsed and extended length with the lift range listed on the product page and with your vehicle's specifications.
What is the difference between monotube and twin-tube shocks?
A monotube uses one tube with a separate gas chamber and generally handles heat better during repeated hard use. A twin-tube uses an inner and outer tube and often rides more softly. The right choice depends on your driving and vehicle.
Are shock absorbers sold individually or in pairs?
It varies by product. Some listings are a single shock, others are a pair or a set for the whole vehicle. Check the sold-as detail on the product page, then confirm the quantity and position before choosing a part.













