Overview
The Rancho RS77326 is a front RS7MT monotube shock for the 2007 through 2018 Jeep Wrangler (JK), in two-door and Unlimited four-door body styles. It fits models with a 0 to 2-inch lift.
The RS7MT is a monotube shock built for adventure and tuned for both on-road and off-road handling. It is gas charged with a 2-inch monotube body, and its design dissipates heat well, which suits off-road use and larger wheel and tire packages.
Compressed length is 15.24 inches, extended length is 23.42 inches, and travel is 8.18 inches. The top mount is a stem and the bottom mount is an eyelet.
The internal rebound bumper and shouldered rubber bushings reduce noise, vibration and ride harshness, and the PTFE-banded piston improves responsiveness as road conditions change.
Key features
- Front monotube shock for a 0 to 2-inch lift
- 14 mm hardened chrome piston rod that resists scuffs and corrosion
- Large 2-inch monotube body filled with all-weather fluid
- Deflective disc valving with digressive, linear or progressive turning
- Full-floating dividing piston with high-pressure nitrogen gas
- Black satin finish with Rancho red logo
Matching shocks to lift height
A front shock controls suspension movement as the axle travels up and down. On a lifted Wrangler it works with the new ride height, so its compressed and extended lengths need to suit the travel the suspension now uses. A shock that is too short can bind at full droop, and one that is too long can strain the mounts at full compression.
Before replacing a front shock, look at the bushings and the rod. Fluid on the body, a clunk over small bumps, or uneven tire wear can point to worn damping. Replace front shocks in pairs so both sides ride the same, and inspect the mounting hardware while the old unit is off.
- Measure the lift before choosing a length
- Inspect stem and eyelet mounts for wear
- Replace front shocks in pairs
- Check brake lines and steering clearance after installing
Specifications
| Brand | Rancho |
|---|---|
| Part number | RANRS77326 |
| Series | RS7MT |
| Position | Front |
| Shock type | Monotube |
| Compressed length | 15.24 inches |
| Extended length | 23.42 inches |
| Travel | 8.18 inches |
| Body diameter | 2.0 inches |
| Top mount | Stem |
| Bottom mount | Eyelet |
Vehicle fitment
It is a front shock for the 2007 through 2018 Jeep Wrangler (JK), in two-door and Unlimited four-door body styles.
The list does not include the Wrangler JL, the Gladiator JT, or Wrangler model years outside 2007 through 2018. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mounting is application specific, so no sleeves or extra hardware are needed. The shock is designed for a 0 to 2-inch lift, so check the lift on your Wrangler before ordering. The deflective disc valving can be digressive, linear or progressive, set for the application.
What’s included
The finish is black satin. Check the package contents against your installation before starting.









