Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers & Shock Accessories
Showing 193–204 of 902 resultsSorted by popularity
-
-
-
-
-
Shock Absorbers & Shock Accessories
Rancho RS9000XL Series Shock Absorber – RS999201
- Rancho RS9000XL front monotube shock for 1984–1989 Toyota Land Cruiser
- Extended length 18.45 inches, collapsed length 12.10 inches
- Nine-position tuning with 18 mm rod and 2.75-inch body
- Part number RANRS999201
SKU: RANRS999201 -
Shock Absorbers & Shock Accessories
Rancho RS9000XL Series Shock Absorber – RS999159
- Rancho RS9000XL front shock for Land Rover Defender, Discovery and Range Rover models
- Fits vehicles without air suspension and a 100-inch wheelbase
- 2.75-inch body with nine-position tuning
- Part number RANRS999159
SKU: RANRS999159 -
Shock Absorbers & Shock Accessories
Rancho RS9000XL Series Shock Absorber – RS999144
- Rancho RS9000XL shock with nine-position tuning for 1984–1992 Toyota Pickup and related models
- 2.75-inch (70 mm) body and 18 mm chrome rod
- Nitrogen gas charged with polyurethane bushings
- Part number RANRS999144
SKU: RANRS999144 -
Shock Absorbers & Shock Accessories
Rancho RS9000XL Series Shock Absorber – RS999070
- Rancho RS9000XL rear shock for the 2020 Jeep Gladiator with a 2-inch lift
- Nine-position manual tuning with an adjustment knob
- 2.75-inch (70 mm) tri-tube body and 18 mm nitro-carburized rod
- Part number RANRS999070
SKU: RANRS999070 -
Shock Absorbers & Shock Accessories
Rancho RS7MT Monotube Rear Shock Absorber – RS77330
- Rancho RS7MT rear monotube shock for 2007–2018 Jeep Wrangler JK, two- and four-door
- Suited to models with a 3.5 to 4-inch lift
- Compressed 17.52 inches, extended 27 inches, travel 9.48 inches
- Part number RANRS77330
SKU: RANRS77330 -
Shock Absorbers & Shock Accessories
Rancho RS7MT Monotube Rear Shock Absorber – RS77328
- Rancho RS7MT rear monotube shock for 2007–2018 Jeep Wrangler JK, two- and four-door
- Suited to models with a 0 to 2-inch lift
- Compressed 15.55 inches, extended 23.86 inches, travel 8.31 inches
- Part number RANRS77328
SKU: RANRS77328 -
Shock Absorbers & Shock Accessories
Rancho RS7MT Monotube Rear Shock Absorber – RS77068
- Rancho RS7MT rear monotube shock for 2018–2026 Jeep Wrangler JL with 3.5 or 4.5-inch lift
- Also fits 2020–2026 Jeep Gladiator
- Compressed 19.76 inches, extended 31.18 inches, travel 11.42 inches
- Part number RANRS77068
SKU: RANRS77068 -
Shock Absorbers & Shock Accessories
Rancho RS7MT Monotube Rear Shock Absorber – RS77066
- Rancho RS7MT rear monotube shock for 2018–2026 Jeep Wrangler JL with 2 or 3.5-inch lift
- It also fits the 2020 through 2026 Jeep Gladiator
- Compressed 19.496 inches, extended 28 inches, travel 8.511 inches
- Part number RANRS77066
SKU: RANRS77066
What a shock absorber does
A spring supports the vehicle, but it is the shock absorber that controls how fast the spring moves. Without damping, a vehicle would keep bouncing after every bump. The shock converts that motion into heat by forcing fluid through valving, which keeps the tire planted and the body under control on washboard, ruts and highway seams.
Common shock designs
- Twin-tube: a compact design with an inner and outer tube. It is common on stock-style and light-duty replacements and generally rides smoothly.
- Monotube: a single tube with a separate gas chamber, usually nitrogen charged. It tends to resist fade better under repeated hard use, and larger bores such as 46mm move more fluid.
- Remote reservoir: adds an external reservoir for extra fluid volume and cooling, aimed at fast desert driving and heavy off-road use.
- Coilover and strut assemblies: combine the spring and damper in one unit, common on independent front suspension.
How to choose
Start with lift height, because a shock has to fit the travel your suspension actually has. Compare collapsed length and extended length against your vehicle's specifications; a shock that is too short can limit droop, and one that is too long can bottom out inside its travel. Many listings in this category are matched to a lift range, such as stock height to 1.5 inches or a 3 to 3.5 inch kit, so read that range closely.
Also note the position (front or rear), whether the shock is sold individually or as a set, the mount style (loop, stem or bolt-in), and whether the vehicle has air or electronic suspension, since shocks made for standard suspension generally do not apply to those systems.
Accessories and rebuild parts
Extension brackets, relocation brackets and mount kits help when a lift changes shock geometry or when a larger shock needs a different mounting position. Boots protect the shaft from dirt and rock chips, and rebuild kits replace worn internal wear items on serviceable shocks. Spherical bearings and spacers fit specific eye sizes, so match the bore and hardware to your existing shock.
Installation notes
Support the axle or frame safely before removing a shock, and replace worn bushings and hardware at the same time. Tighten fasteners to the torque specified by the vehicle or shock manufacturer, ideally with the suspension at ride height so the bushings do not bind. Replace shocks in pairs on the same axle for even handling. If you are changing lift height or the suspension geometry, professional installation and an alignment check are sensible. Always confirm fitment for your exact year, make and model before ordering.
Matching shocks to how you drive
A daily driver that sees mostly pavement and graded roads is usually happiest with a well-valved monotube or twin-tube shock that keeps the ride composed and quiet. A weekend trail rig that crawls over rocks benefits from a shock with enough stroke to let the axle droop, while a truck that runs fast across desert washboard may call for larger bodies and added fluid capacity. Heavy loads such as a camper, a winch bumper or a roof tent change the picture again, because added weight makes damping and spring rate more important. Think about your typical load before choosing, and remember that shocks do not replace springs: if the vehicle sags, the springs may need attention before any shock will feel right. Keep notes on your part numbers and the lift height they were chosen for, since that information makes future replacement much easier.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
Popular Shock Absorbers & Shock Accessories brands
- Pro Comp Suspension (198)
- Bilstein (151)
- ICON Vehicle Dynamics (92)
- FOX (87)
- Rancho (77)
- Rough Country (64)
- Fabtech (63)
- Skyjacker (53)
- ARB 4x4 Accessories (21)
- Rubicon Express (18)
- King Shocks (16)
- Trail Master (14)
Shop Shock Absorbers & Shock Accessories by type
- Suspension Strut Assembly (38)
- Shock Absorber Mount (13)
- Multi Shock Bracket (4)
- Shock Absorber Spherical Bearing (3)
- Shock Absorber Monoball Spacer (1)
- Shock Absorber Relocation Bracket (1)
Shock Absorbers & Shock Accessories FAQ
How do I know when shocks are worn out?
Common signs include a bouncy or floaty ride, nose dive under braking, uneven tire wear, fluid leaking down the shock body, and clunking from loose or worn bushings. A bounce test and a visual inspection help, and shocks wear gradually, so many owners replace them in pairs.
Do I need longer shocks after a lift?
Usually yes. A lift increases the distance between the axle and frame, so the shock needs enough extended length to avoid limiting travel. Compare collapsed and extended length with the lift range listed on the product page and with your vehicle's specifications.
What is the difference between monotube and twin-tube shocks?
A monotube uses one tube with a separate gas chamber and generally handles heat better during repeated hard use. A twin-tube uses an inner and outer tube and often rides more softly. The right choice depends on your driving and vehicle.
Are shock absorbers sold individually or in pairs?
It varies by product. Some listings are a single shock, others are a pair or a set for the whole vehicle. Check the sold-as detail on the product page, then confirm the quantity and position before choosing a part.













