Select your vehicle
-13%

Rancho RS7000MT Monotube Shock – RS7008

Rancho

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rancho RS7000MT monotube shock, part number RS7008, front position
  • Gas charged with high pressure nitrogen and ten stage velocity sensitive valving
  • 1.97 inch (50 mm) body diameter with a 14 mm chrome rod
  • Fits 1994–2001 Dodge Ram 1500, 1994–2002 Dodge Ram 2500 and 1989–1994 Isuzu Amigo and Pickup

Description

Overview

The Rancho RS7008 is a front RS7000MT monotube shock absorber, part number RS7008, from Rancho’s RS7MT series. It is a high pressure gas charged shock with ten stage velocity sensitive valving. It fits the 1994–2001 Dodge Ram 1500, the 1994–2002 Dodge Ram 2500, and the 1989–1994 Isuzu Amigo and 1989–1990 Isuzu Pickup.

The monotube design helps dissipate heat for less fade, and the damping reacts quickly to off-road obstacles. The shock body is 1.97 inches (50 mm) in diameter, with a brushed and zinc plated finish under a clear coat. The valving is application specific.

Key features

  • Monotube design
  • High pressure nitrogen gas charge
  • Ten stage velocity sensitive valving
  • 14 mm chrome rod
  • Brushed and zinc plated finish with a clear coat
  • 1.97 inch (50 mm) body diameter

Monotube shocks on older trucks

A monotube shock uses a single main cylinder, which gives it more room to move heat away from the working oil. That design is often chosen for trail use, where repeated hard hits can build heat and cause fade. The gas charge keeps the oil under pressure to limit foaming, which helps the shock respond the same way on the tenth bump as on the first.

When fitting a monotube shock to an older truck, check the upper and lower mounts, bushings and bump stops, since a new shock cannot correct worn parts. Confirm the lift system on the truck before installing, because the shock may be matched to a specific setup. Keep the boot clean, and inspect the rod for scratches that could damage the seal.

  • Inspect rod seals for leaks
  • Check bushings and bump stops
  • Confirm the lift system before install

Specifications

Brand Rancho
Part number RS7008
Series RS7000MT (RS7MT series)
Position Front
Body diameter 1.97 inch (50 mm)
Rod 14 mm chrome
Charge Gas charged, high pressure nitrogen
Valving Ten stage, velocity sensitive
Finish Brushed and zinc plated, clear coat
Application notes Without off road package; for use with Rancho RS6445 system; use with Rancho RS6565 system

Vehicle fitment

It fits the 1994–2001 Dodge Ram 1500, the 1994–2002 Dodge Ram 2500 (Base), the 1989–1994 Isuzu Amigo and the 1989–1990 Isuzu Pickup, including the 1 Ton version.

Other Ram generations, Isuzu models and model years outside those listed are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The application notes say the shock is for use without the off road package, and that it works with the Rancho RS6445 system or the RS6565 system. Check which setup your vehicle has before installing it.

What’s included

The shock. Confirm whether mounting hardware is needed before starting the install.

Fitment

VehicleYearsTrims
Dodge Ram 15001994–2001Base, LT, Laramie, ST, Sport
Dodge Ram 25001994–2002Base
Isuzu Amigo1989–1994S, XS
Isuzu Pickup1989–1990LS, S, XS
Isuzu Pickup 1 Ton1989–1990All

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Rancho RS7008 fit a 1994–2001 Dodge Ram 1500?

Yes. It fits the 1994–2001 Dodge Ram 1500. Confirm the year and model of your truck against that range before installing the shock.

Is the RS7008 a gas charged shock?

Yes. It is a monotube shock with a high pressure nitrogen gas charge. The design improves heat dissipation for less fade and gives sensitive damping on rough off-road terrain.

Does this shock work with a Rancho lift system?

The application notes say it is for use without the off road package, and that it works with the Rancho RS6445 system or the RS6565 system. Check which system is on your vehicle first.

What is the body diameter?

The body is 1.97 inches (50 mm) in diameter, paired with a 14 mm chrome rod. Measure your mounting space if clearance is tight.

Can a monotube shock be rebuilt?

Some can be serviced with seal and valve kits, though many owners replace them instead. Check the body and rod for damage first, and look for leaks around the rod seal, since those leaks mean the seal needs attention.

How should a gas charged shock be handled?

Treat it as a pressurized part. Keep the shock upright during storage, avoid heating the body, and do not cut or drill it. Let a shop handle any disassembly if you are unsure of the gas charge.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon