Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers & Shock Accessories
Showing 169–180 of 902 resultsSorted by popularity
-
Suspension Strut Assembly
Rough Country 2 Inch Front Leveling Strut Kit – 501083
- Rough Country 2 inch front leveling strut kit for 2004 to 2008 Ford F-150 trucks
- Chrome plated piston rod, leak-proof piston seal and variable dampening
- Replaces the factory strut, with no strut disassembly required
- Part number 501083, unfinished
SKU: R/C501083 -
Shock Absorbers & Shock Accessories
Rock Krawler TJ/LJ 3.5 Inch Twin Tube Shock Set – RRD04016
- Rock Krawler 3.5 inch RRD Spec twin tube shock set for TJ and LJ Wrangler
- Front and rear positions, emulsion hydraulic type
- Fits 1997 to 2006 TJ and 2004 to 2006 LJ Unlimited models
- Part number RKSRRD04016
SKU: RKSRRD04016 -
Shock Absorbers & Shock Accessories
Rock Krawler RRD Spec Twin Tube Shock Package (3.5″ Lift) – RRD04014
Shock Absorbers & Shock AccessoriesRock Krawler RRD Spec Twin Tube Shock Package (3.5″ Lift) – RRD04014
- Rock Krawler RRD Spec twin tube shock package for a 3.5 inch lift on the 2018 to 2026 Jeep Wrangler JL
- Front and rear positions with eyelet bottom mounts
- Gas charged twin tube design
- Part number RKSRRD04014
SKU: RKSRRD04014 -
-
Shock Absorbers & Shock Accessories
Rock Krawler Rear 2.625-11 Remote Reservoir Shock – RRD07653RR
- Rock Krawler rear RRD 2.625 remote reservoir shock for the 2007 to 2018 Jeep Wrangler JK
- Fluted aluminum body, 1-inch Nitrotec steel shaft and gas charged design
- Comes with a 6 month warranty against defects in materials and workmanship
- Part number RKSRRD07653RR
SKU: RKSRRD07653RR -
-
Shock Absorbers & Shock Accessories
Rock Krawler 2.5″ Twin Tube Shock Package (2.5″ Lift) – RRD04013
Shock Absorbers & Shock AccessoriesRock Krawler 2.5″ Twin Tube Shock Package (2.5″ Lift) – RRD04013
- Rock Krawler RRD Spec twin tube shock package for a 2.5 inch lift on the 2018 to 2026 Jeep Wrangler JL
- Foam-cell technology, chrome plated shaft and sintered iron piston
- Economical shock option for JL owners
- Part number RKSRRD04013
SKU: RKSRRD04013 -
Shock Absorbers & Shock Accessories
Rock Krawler 2.25 RRD Shock Set for 3.5 Inch Lift – RRD02305
- Rock Krawler RRD 2.25 shock set for a 3.5 inch lift, with front and rear positions
- Monotube design with emulsion hydraulic type
- Fits 2007 to 2018 JK, 2004 to 2006 LJ and 1997 to 2006 TJ Wrangler models in named trims
- Part number RKSRRD02305
SKU: RKSRRD02305 -
Shock Absorbers & Shock Accessories
Rock Krawler 2.25 RRD Shock Package (4.5″ Lift) – RRD02309
- Rock Krawler RRD 2.25 shock package for a 4.5 inch lift on the 2018 to 2026 Jeep Wrangler JL
- Fluted aluminum 2.25 inch body with hard anodized coating
- 3/4-inch bare Nitrotec steel shaft and billet aluminum valve circuit
- Part number RRD02309
SKU: RKSRRD02309 -
Shock Absorbers & Shock Accessories
ReadyLift SST3000 Rear Shock for 5″ Lift – 93-3057R
- Rear SST3000 shock for 5 inch rear lift on 2007 to 2018 Chevrolet Silverado 1500 and GMC Sierra 1500
- Custom valving for each application
- Gas and oil separated design, nitrogen charged, sold individually
- Part number RDY93-3057R
SKU: RDY93-3057R
What a shock absorber does
A spring supports the vehicle, but it is the shock absorber that controls how fast the spring moves. Without damping, a vehicle would keep bouncing after every bump. The shock converts that motion into heat by forcing fluid through valving, which keeps the tire planted and the body under control on washboard, ruts and highway seams.
Common shock designs
- Twin-tube: a compact design with an inner and outer tube. It is common on stock-style and light-duty replacements and generally rides smoothly.
- Monotube: a single tube with a separate gas chamber, usually nitrogen charged. It tends to resist fade better under repeated hard use, and larger bores such as 46mm move more fluid.
- Remote reservoir: adds an external reservoir for extra fluid volume and cooling, aimed at fast desert driving and heavy off-road use.
- Coilover and strut assemblies: combine the spring and damper in one unit, common on independent front suspension.
How to choose
Start with lift height, because a shock has to fit the travel your suspension actually has. Compare collapsed length and extended length against your vehicle's specifications; a shock that is too short can limit droop, and one that is too long can bottom out inside its travel. Many listings in this category are matched to a lift range, such as stock height to 1.5 inches or a 3 to 3.5 inch kit, so read that range closely.
Also note the position (front or rear), whether the shock is sold individually or as a set, the mount style (loop, stem or bolt-in), and whether the vehicle has air or electronic suspension, since shocks made for standard suspension generally do not apply to those systems.
Accessories and rebuild parts
Extension brackets, relocation brackets and mount kits help when a lift changes shock geometry or when a larger shock needs a different mounting position. Boots protect the shaft from dirt and rock chips, and rebuild kits replace worn internal wear items on serviceable shocks. Spherical bearings and spacers fit specific eye sizes, so match the bore and hardware to your existing shock.
Installation notes
Support the axle or frame safely before removing a shock, and replace worn bushings and hardware at the same time. Tighten fasteners to the torque specified by the vehicle or shock manufacturer, ideally with the suspension at ride height so the bushings do not bind. Replace shocks in pairs on the same axle for even handling. If you are changing lift height or the suspension geometry, professional installation and an alignment check are sensible. Always confirm fitment for your exact year, make and model before ordering.
Matching shocks to how you drive
A daily driver that sees mostly pavement and graded roads is usually happiest with a well-valved monotube or twin-tube shock that keeps the ride composed and quiet. A weekend trail rig that crawls over rocks benefits from a shock with enough stroke to let the axle droop, while a truck that runs fast across desert washboard may call for larger bodies and added fluid capacity. Heavy loads such as a camper, a winch bumper or a roof tent change the picture again, because added weight makes damping and spring rate more important. Think about your typical load before choosing, and remember that shocks do not replace springs: if the vehicle sags, the springs may need attention before any shock will feel right. Keep notes on your part numbers and the lift height they were chosen for, since that information makes future replacement much easier.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
Popular Shock Absorbers & Shock Accessories brands
- Pro Comp Suspension (198)
- Bilstein (151)
- ICON Vehicle Dynamics (92)
- FOX (87)
- Rancho (77)
- Rough Country (64)
- Fabtech (63)
- Skyjacker (53)
- ARB 4x4 Accessories (21)
- Rubicon Express (18)
- King Shocks (16)
- Trail Master (14)
Shop Shock Absorbers & Shock Accessories by type
- Suspension Strut Assembly (38)
- Shock Absorber Mount (13)
- Multi Shock Bracket (4)
- Shock Absorber Spherical Bearing (3)
- Shock Absorber Monoball Spacer (1)
- Shock Absorber Relocation Bracket (1)
Shock Absorbers & Shock Accessories FAQ
How do I know when shocks are worn out?
Common signs include a bouncy or floaty ride, nose dive under braking, uneven tire wear, fluid leaking down the shock body, and clunking from loose or worn bushings. A bounce test and a visual inspection help, and shocks wear gradually, so many owners replace them in pairs.
Do I need longer shocks after a lift?
Usually yes. A lift increases the distance between the axle and frame, so the shock needs enough extended length to avoid limiting travel. Compare collapsed and extended length with the lift range listed on the product page and with your vehicle's specifications.
What is the difference between monotube and twin-tube shocks?
A monotube uses one tube with a separate gas chamber and generally handles heat better during repeated hard use. A twin-tube uses an inner and outer tube and often rides more softly. The right choice depends on your driving and vehicle.
Are shock absorbers sold individually or in pairs?
It varies by product. Some listings are a single shock, others are a pair or a set for the whole vehicle. Check the sold-as detail on the product page, then confirm the quantity and position before choosing a part.











