Overview
The Rancho RS55046A is a rear RS5000X shock for the 2017 through 2020 Ford F-250 Super Duty and the 2019 through 2020 F-350 Super Duty. It is a stock height rear shock.
It is a gas charged twin tube shock with progressive engagement valving, a tuned compression control valve and an enlarged 2-1/4-inch twin tube body with gas pressurization. It has a 16 mm nitro-carburized rod, a full-displaced 35 mm bore and a 1-3/8-inch sintered iron piston. Its compressed length is 16.41 inches, its extended length is 27.41 inches and its travel is 10.78 inches.
The lower and upper mounting codes are both LS78, so compare that code with the shock you are replacing. Rancho says its rebound valving is patented and was developed by its ride engineers to improve on and off road handling.
Key features
- Rear twin tube shock at stock height
- Progressive engagement valving
- Tuned compression control valve
- Gas pressurized, enlarged 2-1/4-inch twin tube body
- 16 mm nitro-carburized rod and full-displaced 35 mm bore
- Rebound bumper, black natural rubber bushings and double-welded loops
- Low-friction, self-lubricating seal and protective boot
Rear shocks on heavy-duty trucks
Heavy-duty pickups often carry payloads, pull trailers or run heavier tires, and their rear shocks work hard under those loads. Over time the damping can fade, which lets the rear end bounce and sway. Keeping the original ride height matters, because the shock is matched to the factory spring rate and suspension geometry.
Replace rear shocks as a matched pair to keep the back of the truck balanced. While installing, check the rubber bushings, mounting bolts and boot for splits, and tighten fasteners firmly. Recheck them after the first few drives and look for oil on the shock body.
- Match ride height to the original
- Replace rear shocks in pairs
- Inspect rubber bushings and mounts
- Watch for oil on the shock body
Specifications
| Brand | Rancho |
|---|---|
| Part number | RANRS55046A |
| Series | RS5000X |
| Position | Rear |
| Shock type | Twin tube |
| Compressed length | 16.41 inches |
| Extended length | 27.41 inches |
| Travel | 10.78 inches |
| Upper and lower mounting code | LS78 |
| Lift or drop | None |
Vehicle fitment
It fits the 2017 through 2020 Ford F-250 Super Duty in the King Ranch, Lariat, XL and XLT versions, and the 2019 through 2020 F-350 Super Duty in the King Ranch, Lariat, Platinum, XL and XLT versions.
The list does not include the 2016 and earlier Super Duty trucks, the 2021 and later models, or the F-450 and F-550. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A protective boot is listed with this rear shock.









