Exterior Parts & Car Care
Showing 1057–1068 of 3396 resultsSorted by popularity
-
Tube Fenders
Poison Spyder Standard Crusher Corners (Bare Aluminum) – 13-04-020-ALUM
- Poison Spyder Standard Crusher Corners in bare aluminum for the 1987-1995 Jeep Wrangler (YJ)
- 3/16 inch 6061-T6 plate aluminum with stainless steel hardware
- Full corner type; cutting or drilling required
- Poison Spyder says they save up to 50 pounds compared with steel
SKU: PSC13-04-020-ALUM -
Tube Fenders
Poison Spyder Standard Crusher Corners (Bare Steel) – 13-04-020
- Standard crusher corners in bare steel for the 1987–1995 Jeep Wrangler YJ
- 3/16-inch plate steel, roll-formed to the body lines
- Includes provisions for flush-mounted LED taillights and the factory fuel filler
- Countersunk bolt holes with stainless steel flat head cap screws; UPC 614901724028
SKU: PSC13-04-020 -
Tube Fenders
Poison Spyder Stock Crusher Corners (Bare Aluminum) – 13-04-010-ALUM
- Stock crusher corners in bare aluminum for the 1987–1995 Jeep Wrangler YJ
- High strength 3/16-inch 6061-T6 aluminum, CNC laser cut and formed
- Factory wheel and fuel filler openings kept; mounts for factory equipment included
- Up to 50 pounds lighter than steel; UPC 614901724011
SKU: PSC13-04-010-ALUM -
Replacement Tailgates
Poison Spyder Tailgate Hinge Delete Plates – 13-04-005
- Bare aluminum Poison Spyder tailgate hinge delete plates, part number 13-04-005
- Fills the hinge cut-outs in Crusher Corners after the tailgate is removed
- 6061-T6 aluminum, countersunk holes
- Stainless flat-head cap screws included
SKU: PSC13-04-005 -
Tube Fenders
Poison Spyder Standard Crusher Corners (Bare Aluminum) – 12-04-020-ALUM
- Standard crusher corners in bare aluminum, cut from 3/16-inch 6061-T6 plate
- Fits 1981–1985 Jeep Scrambler in Base, Laredo, Renegade, SL and SR trims
- The aluminum corners weigh up to 50 pounds less than steel
- Stainless steel hardware; UPC 614901723762
SKU: PSC12-04-020-ALUM -
Tube Fenders
Poison Spyder Standard Crusher Corners (Bare Steel) – 12-04-020
- Standard crusher corners in bare steel for the 1981–1985 Jeep Scrambler
- 3/16-inch plate steel, roll-formed to the Jeep’s body lines
- Provisions for flush-mounted LED taillights and the factory fuel filler opening
- Countersunk bolt holes with stainless steel hardware; UPC 614901723755
SKU: PSC12-04-020 -
Tube Fenders
Rear Steel Crusher Corners with 3″ Defender Flares
- Rear steel Crusher Corners with 3 inch wide weld-on DeFender flares, part 11-04-073
- Fits 1976 to 1986 CJ7
- Bare steel, CNC laser cut from 3/16 inch plate steel
- Larger TJ-style wheel opening and factory fuel filler opening
- Provisions for flush-mounted LED taillights, sold separately
SKU: PSC11-04-073
How this category is organized
Exterior Parts & Car Care is a wide category, so the subcategories are the quickest way to find what you need. The listings include protection parts, body and trim pieces, cargo carriers and small repair items from many brands, including Smittybilt, Bushwacker, Omix-Ada, Crown Automotive, Rugged Ridge, Bestop and Poison Spyder Customs.
- **Protection.** Rock sliders, skid plates, body armor, tube fenders and roll bars guard the underside and body from trail damage.
- **Carry and storage.** Roof racks, tire carriers, fuel and water can mounts, tailgate storage and truck bed items.
- **Body and trim.** Grilles, hoods, hood vents, door handles, hinges, tailgate parts and fuel filler doors.
- **Weather and glass.** Soft tops, windshield channels, window visors, wiper blades and washer parts.
- **Truck bed.** Bed liners, mats, side rail protectors and tailgate caps.
- **Care and repair.** Seals, snap repair kits, replacement locks and finishing touches.
Choosing a part
- **Define the job.** Ask whether you need protection, appearance, repair or carrying capacity. A rock slider and a window visor serve very different purposes.
- **Material and finish.** Steel is strong and heavy and needs coating. Aluminum saves weight. Powder coat and paintable plastic have different upkeep. Bare steel needs paint before use.
- **Vehicle fit.** Most exterior parts are vehicle specific because body lines, mounting points and sensors differ by year and model. Confirm fitment for your exact year, make and model, and use the product's notes, such as 2- and 4-door or paintable finish.
- **Hardware and tools.** Some products need welding, drilling or reuse of factory hardware. Read the details in the listing.
Installation notes
Protective parts such as rock sliders, skid plates and roll bars attach to the frame or body structure, so use the specified hardware and torque to the manufacturer's values. Welded parts should be installed by someone who can weld properly. Roll bars and cages are safety equipment, and a professional install is wise.
Soft tops and trim parts often depend on temperature and careful alignment, so follow the instructions. Fender flares, visors and lighting can be regulated by state, so check local regulations. Always keep the weight of racks and carriers within the vehicle's rated limits and the rack maker's load rating.
When shopping a category this wide, make a short list of your goals and measure the spots where parts will go. Note the vehicle's body style, cab length, roof type and factory options. Photograph existing mounts, because aftermarket parts often reuse them or require removal of trim.
Parts commonly used together include rock sliders with skid plates, tire carriers with bumpers-bumpers-tire-carriers-winch-mounts-2, fender flares with tire and wheel upgrades, and roof racks with crossbars and mounts. Common mistakes are overloading racks, ignoring clearance with lift or tire changes, and skipping rust protection on bare steel and weld seams. Maintenance depends on the part. Wash and wax painted and polished surfaces, inspect welds and bolts after hard trail use, check seals for drying or cracking, and keep drain holes on bed parts and racks clear.
Popular Exterior Parts & Car Care brands
- Bushwacker (357)
- Smittybilt (334)
- Crown Automotive (257)
- Bestop (252)
- Rugged Ridge (223)
- Omix-Ada (222)
- Poison Spyder Customs (194)
- Auto Ventshade (111)
- Rampage (98)
- BedRug (76)
- Kentrol (75)
- Jeep (69)
Shop Exterior Parts & Car Care by type
- Fender Flares (527)
- Rock Sliders and Guards (176)
- Skid Plates (149)
- Roof Rack (122)
- Side Window Vent Visors (125)
- Tube Fenders (102)
- Windshield Wiper & Washer (78)
- Hood Latch Assembly (75)
- Tire Carriers (71)
- Fuel Filler Doors (70)
- Roof Rack Mounts (68)
- Truck Bed Mat (59)
- Fuel and Water Cans (53)
- Exterior Hinges (42)
- Roll Cages & Roll Bars (44)
- Grille Shells (43)
- Floor Pan (40)
- Replacement Grilles (35)
- Kleinn Train Horns (26)
- Wiper Blades and Refills (26)
- Hood Vent (31)
- Truck Bed Tailgate Extension (32)
- Truck Bed Liner (29)
- Truck Bed Organizer (29)
- Tailgate Covers and Storage (27)
- Exterior Door Handle (22)
- Windshield Bracket (21)
- Grille Emblems (24)
- Tailgate Locks (24)
- Windshield Channel (23)
Exterior Parts & Car Care FAQ
How do I find the right exterior part for my vehicle?
Start with the subcategory for the part type, then check the product's fitment notes for year, make, model and body style. Confirm fitment for your exact vehicle using the manufacturer's specifications.
Do rock sliders and skid plates need professional installation?
Bolt-on versions can be done with basic tools and a helper, while others require welding. Because they attach to structural parts, use the specified hardware and torque, and consider a professional if welding is needed.
What does paintable mean on fender flares or trim?
Paintable parts come with a matte or primed surface that accepts paint, so you can match the vehicle color. Preparation, such as cleaning and using an adhesion promoter, is needed for a good finish.
Are exterior accessories regulated?
Some are. Fender coverage, window visors, lighting and bumpers can be subject to state rules. Requirements vary, so check local regulations before modifying the vehicle.











