Overview
The Poison Spyder Rocker Knockers with Sliders, bare steel, part number 12-08-020, are body-mounted rocker guards with a tubular slider, built for the CJ8 model. They fit the 1981 to 1985 Jeep Scrambler, which is the CJ8 body in that range. The guards are high strength 3/16 inch plate steel, brake-formed for a precise fit.
On a CJ8, the rocker panel is exposed, and rocks can strike it as the Jeep works through obstacles. The guards cover that area in plate steel, and the DOM slider keeps the sides of the Jeep away from the rocks. The slider also works as a pivot and a short entry step.
The slider is DOM structural tubing welded to the guard with spacers, so the assembly is a single unit. Because the guard is body-mounted, it follows the body when a body lift is fitted.
Key features
- High strength 3/16 inch plate steel, CNC laser-cut
- Brake-formed for a precise fit to the rocker panel
- High strength DOM structural tubing slider
- Slider welded to the guard with DOM tube spacers
- Countersunk bolt holes for flat, unobstructed surfaces
- Mounts to the body, so no gap appears with a body lift
Scrambler body considerations
The CJ8 body, sold as the Scrambler in this range, has a rocker and body structure that differs from the smaller CJs, so the guard is built around that shape. Before drilling, check that the guard follows the body lines and that the body mounts are solid. Old body mounts can crack or rust, and a guard bolted to a weak mount will not protect as intended.
Because a body-mounted guard sits against the tub, moisture can collect between the two. Clean and prime the contact areas, and consider a rubber liner to keep the paint from wearing through. The slider adds a second contact point, so check its spacers and welds after rough trips.
- Inspect body mounts before drilling
- Prime bare steel at contact areas
- Check spacers after trail use
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 12-08-020 |
| UPC | 614901723847 |
| Type | Formed plate guard with tubular standoff and slider |
| Finish | Bare steel |
| Material | High strength 3/16 inch plate steel |
| Slider | High strength DOM structural tubing |
| Fasteners | Countersunk stainless steel flat-head, included |
| Installation | Cutting or drilling required |
Vehicle fitment
They fit the 1981 to 1985 Jeep Scrambler. Check the body against the guard shape before drilling. Confirm your Jeep is a Scrambler and check the year range before ordering, since the CJ8 body is what the guard is shaped around.
Confirm your vehicle’s year, model and trim before ordering. Rubber rocker liners are sold separately.
Installation notes
Cutting or drilling is required to mount the guard to the body. The hardware and instructions are included, and the slider should be lined up with the guard before the bolts are fully tightened.
What’s included
Scrambler rocker knockers with sliders attached, plus the stainless hardware and instructions.














