Overview
The Poison Spyder 12-04-020 is a set of standard crusher corners in bare steel for the 1981–1985 Jeep Scrambler, in Base, Laredo, Renegade, SL and SR trims. Crusher corners protect the rear corners of the Jeep body from rock and trail damage.
Standard crusher corners include the wheel opening design and the factory fuel filler opening. They have provisions for flush-mounted LED taillights, sold separately. A high intensity flush-mount LED taillight suits this corner for safety, durability and a clean look.
The corners are laser cut from high strength 3/16-inch plate steel and then carefully roll-formed to the Jeep’s body lines. All of the bolt holes are countersunk, and the supplied stainless steel flat head cap screws leave a smooth, flat surface that slides over rocks instead of catching on them.
Bare steel is the finish, so the owner decides on paint or powder coat.
Key features
- Standard crusher corners in bare steel
- Roll-formed from 3/16-inch plate steel
- Provisions for flush-mounted LED taillights, sold separately
- Factory fuel filler opening included
- Countersunk bolt holes
- Stainless steel flat head cap screws for a smooth surface
Scrambler rear corner upkeep
Rear corners take the most contact on a Scrambler when the Jeep climbs over ledges or backs into brush, so the bolts and corner edges should be checked regularly. Crusher corners protect the body where rock strikes would otherwise dent the sheet metal. Look at the mounts after rough trips and after any changes to the rear bumper or spare tire carrier.
Bare steel will rust if the paint wears off, particularly at the cut edges and at countersunk holes. Clean the corners, prime bare areas and apply paint or powder coat before the Jeep sees heavy use. Keeping the taillight wiring clear of the corner edges helps prevent chafing and shorts.
- Check bolts after rocky trips
- Touch up paint at cut edges
- Keep wiring clear of sharp corner edges
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 12-04-020 |
| UPC | 614901723755 |
| Corner type | Full |
| Material | Steel, 3/16-inch plate |
| Hardware | Stainless steel |
| Finish | Bare steel |
| Installation type | Cutting or drilling required |
| Fitment type | Direct fit |
Vehicle fitment
Poison Spyder lists these standard crusher corners as a direct fit for the 1981–1985 Jeep Scrambler, including the Base, Laredo, Renegade, SL and SR models.
The list does not include the CJ models or the Wrangler. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting or drilling. Check the factory fuel filler and taillight location before drilling, since the corners include both. Paint or powder coat the bare steel after fitting.
What’s included
The bare steel standard crusher corners with the supplied stainless steel flat head cap screws.
Not included: the flush-mounted LED taillights, which are sold separately, and paint or powder coating.












