Overview
The Poison Spyder 12-04-020-ALUM is a set of standard crusher corners in bare aluminum for the 1981–1985 Jeep Scrambler, listed in Base, Laredo, Renegade, SL and SR trims. Crusher corners are rear corner armor that shields the body from side and corner impacts on the trail.
The corners are cut from 3/16-inch 6061-T6 aluminum, a lightweight alloy. They are CNC laser cut and formed for a close fit, the same way as the steel corners, and are designed to protect against side and corner impacts. The aluminum set weighs up to 50 pounds less than the steel version.
Bare aluminum can be left raw, painted, powder coated or polished. Over time the only expected change is light surface oxidation, with little risk of corrosion. The aluminum corners are not sold with integrated crusher flares. A bolt-on steel flare kit is planned to match them, with no release date yet.
Key features
- Bare aluminum finish, ready to paint, powder coat, polish or leave raw
- 3/16-inch 6061-T6 aluminum, CNC laser cut
- Formed to a precise fit for the Scrambler body
- Up to 50 pounds lighter than the steel corners
- Stainless steel hardware
Aluminum versus steel on the trail
Aluminum is lighter than steel, which helps with overall weight and with the load carried on the corners. Lighter corners can make a difference on a build where weight is kept low, but aluminum dents more easily than steel of the same thickness, so consider how rocks and brush will reach the corner before choosing.
Bare aluminum can take paint or powder coat for a finished look. Clean the surface and dry it fully before coating so the finish bonds well. Over time, light oxidation may appear, and a quick scuff and a fresh coat will keep the corners looking uniform.
- Clean and dry before any coating
- Check edges for dents after rough trails
- Replace worn hardware with stainless when needed
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 12-04-020-ALUM |
| UPC | 614901723762 |
| Corner type | Full |
| Material | 3/16-inch 6061-T6 aluminum |
| Hardware | Stainless steel |
| Finish | Bare aluminum |
| Installation type | Cutting or drilling required |
| Fitment type | Direct fit |
Vehicle fitment
Poison Spyder lists these crusher corners as a direct fit for the 1981–1985 Jeep Scrambler, including the Base, Laredo, Renegade, SL and SR models.
They are not intended for CJ models or the Wrangler. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting or drilling. The stainless hardware is fitted as the corner is mounted. Check the fit around the factory fuel filler and taillights before drilling, and finish the aluminum before the corners go on if you want a painted look.
What’s included
A set of bare aluminum standard crusher corners with stainless steel hardware.
Not included: the steel crusher flare kit planned for future release, and any paint or powder coating.












