Overview
The Poison Spyder Tailgate Hinge Delete Plate, part number 13-04-005, is a bare aluminum plate that covers the hinge cut-outs in Poison Spyder Crusher Corners once a tailgate has been removed. It is laser cut from 6061-T6 aluminum plate and fits the 1987 to 1995 Jeep Wrangler YJ.
If a Trailgate is installed alongside Crusher Corners, the hinge openings are left empty when the factory tailgate hinges come off. These plates are made to fill those openings so the corners look finished.
Key features
- Fills the hinge cut-outs in Crusher Corners or Trail Corners
- CNC laser cut from 6061-T6 aluminum plate
- Countersunk mounting holes
- Stainless steel flat-head cap screws included
- Sold raw for painting or powder coating
Preparing the hinge area
Once the tailgate is off, the hinge openings are exposed to road spray, mud and water. Clean the area thoroughly before fitting the plates, removing grease, dirt and any loose rust so the plates sit against a sound surface. A bare plate fitted over bare metal can trap moisture, so the surfaces should be dry before assembly.
Check the corners for damage around the openings, such as cracks, bent flanges or previous repair work, before committing to the plates. Plan the paint or powder coat ahead of time, and let it cure fully before the screws go in. Use the countersunk screws carefully so the head sits flush without distorting the plate.
- Clean and dry the openings before fitting
- Use a barrier between aluminum and steel contact points
- Recheck the screws after the first drive
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 13-04-005 |
| UPC | 614901736113 |
| Material | 6061-T6 aluminum |
| Finish | Bare aluminum |
| Mounting holes | Countersunk |
| Fasteners | Stainless steel flat-head cap screws |
Vehicle fitment
These plates fit the 1987 to 1995 Jeep Wrangler YJ. They fit the Crusher Corners and Trail Corners, so the corner set on your Jeep needs to be the Poison Spyder version.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Paint or powder coat the plates before fitting them so they match the corners. The countersunk holes take the stainless steel screws, so the plate sits flush.
What’s included
Two bare aluminum hinge delete plates and the stainless steel flat-head cap screws.









