Overview
The Poison Spyder 11-04-073 is a set of rear steel Crusher Corners with 3 inch wide weld-on DeFender flares, made for the 1976–1986 Jeep CJ7. Crusher Corners protect the body corners from rocks and trail damage, and these are finished in bare steel. The corners fit the 1976–1986 Jeep CJ7 across its base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade models.
The corners are CNC laser cut from high strength 3/16 inch plate steel, then roll-formed to follow the CJ7 body lines. They include the larger TJ-style wheel opening, provisions for flush-mounted LED taillights that are sold separately, and the factory fuel filler opening.
The DeFender flares are fabricated entirely from 3/16 inch plate, CNC laser cut and precision brake-formed. The corners with these flares suit Jeeps already fitted with DeFenders up front, and the flares are built to match the durability of the corner itself.
Traditional tube flares are built on thinner tubing for the outer rail, while these flares are fabricated from 3/16 inch plate with a full under-side return for strength. The mounting work requires cutting or drilling, and the weld-on flares require welding.
Key features
- Rear full corner armor for the CJ7
- 3 inch wide weld-on DeFender flares
- Larger TJ-style wheel opening
- Factory fuel filler opening
- Provisions for flush-mounted LED taillights
- Countersunk holes with stainless flat head screws
Fitting CJ7 corners
CJ7 body corners sit close to the tires and the rocker area, so the fit depends on the body being straight and the old corners removed cleanly. Remove rust and old filler from the mounting areas first, and check the body for cracks that a new corner would load. Clamp the corner in place and confirm the wheel opening and fuel filler opening line up before any welding.
Trail use puts stress on rear corners, so inspect welds and fasteners after rough runs. Steel armor needs protection at cut edges, so touch up bare areas to slow rust. Route wiring for flush-mounted taillights before the body panels are closed up.
- Remove rust from mounting areas before fitting
- Check the body for cracks before welding
- Route taillight wiring early
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 11-04-073 |
| UPC | 614901734119 |
| Position | Rear |
| Corner type | Full |
| Finish | Bare steel |
| Material | Steel, 3/16 inch plate |
| Flare width | 3 inch wide weld-on |
| Installation | Cutting or drilling required |
Vehicle fitment
Poison Spyder lists these corners for the 1976–1986 Jeep CJ7, across its base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade models.
This set is for the CJ7. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The listed installation type is cutting or drilling, and the flares are weld-on, so plan for both before the corners are placed on the CJ7 body.
What’s included
Rear steel Crusher Corners with 3 inch wide weld-on DeFender flares.
Not included: the flush-mount LED taillights, which are sold separately.












