Overview
The Poison Spyder 13-04-020-ALUM is a set of Standard Crusher Corners in bare aluminum for the 1987-1995 Jeep Wrangler (YJ). Crusher Corners are a corner protection product, and this version is made from 3/16 inch 6061-T6 aluminum with stainless steel hardware.
The aluminum Crusher Corners protect against side and corner impacts and weigh less than the steel version, saving up to 50 pounds. They are CNC laser-cut and formed for a precise fit, and can be painted, powder coated, polished or left as raw aluminum.
Check the attachment steps and any surface prep needed before painting or powder coating.
Key features
- 3/16 inch 6061-T6 plate aluminum
- Stainless steel hardware
- Full corner type
- CNC laser-cut and formed for a precise fit
- Saves up to 50 pounds compared with steel, per the manufacturer
- Can be painted, powder coated or polished, or left as raw aluminum
- Not offered with integrated Crusher Flares
- Cutting or drilling required for installation
Caring for aluminum body armor
Aluminum body armor is lighter than steel, which helps when the front end already carries a winch or a heavy bumper. Aluminum can react with steel fasteners and bare metal in wet conditions, so keeping the stainless hardware in place and using a barrier such as paint or anti-seize where dissimilar metals meet helps prevent corrosion. Clean the corners with mild soap and water after mud runs.
Bare aluminum oxidizes into a dull, chalky surface over time. Polishing restores shine, and clear coat or powder coat slows the change. Inspect the corners after hard hits for cracked edges, bent flanges and loose fasteners, and check that cut or drilled holes are clean and free of burrs. Bent corners should be replaced rather than hammered back into shape.
- Stainless hardware kept tight and undamaged
- Paint or anti-seize at dissimilar metal contact points
- Deburr any new holes before fitting
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 13-04-020-ALUM |
| Catalog part number | PSC13-04-020-ALUM |
| UPC | 614901724035 |
| Product type | Crusher Corners (body armor) |
| Corner type | Full |
| Material | Aluminum, 6061-T6 |
| Plate thickness | 3/16 inch |
| Finish | Bare aluminum |
| Hardware | Stainless steel |
| Installation type | Cutting or drilling required |
| Fit type | Direct fit |
Vehicle fitment
The stored manufacturer fitment list for the Poison Spyder 13-04-020-ALUM covers the 1987-1995 Jeep Wrangler (YJ) in Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
This list covers the YJ Wrangler only. The CJ, TJ, LJ, JK and JL models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Follow the included instructions and use the hardware provided. Torque fasteners to their specified values and re-check them after the first miles of driving.
If a step involves cutting, drilling or removing factory parts, work carefully and consider professional installation.
Installation requires cutting or drilling, so measure carefully and wear eye and hearing protection.
Before installing, compare the part number on the package with 13-04-020-ALUM and check that all parts are present. Work on level ground, wear eye protection, and keep the instructions for reference.
What’s included
- Standard Crusher Corners in bare aluminum
- Stainless steel hardware
Not included: Paint or powder coat is not included, so the corners arrive as bare aluminum. Integrated Crusher Flares are not offered with this version.














