Overview
The Rubicon Express RE9954 is a spring perch (axle bracket) set that Rubicon Express says is required for mounting a custom Dana 30 or Dana 44 axle in a Jeep Wrangler JK, or for upgrading the strength of an existing axle over stock brackets. The JK is the 2007 to 2018 Wrangler.
The brackets are laser cut from 1/4 inch and 3/16 inch cold rolled steel and CNC formed. Welding is required for installation.
Key features
- Spring perch brackets for a JK axle swap or axle strength upgrade
- Laser cut from 1/4 inch and 3/16 inch cold rolled steel
- CNC formed for precise fit
- Used to mount a custom Dana 30 or Dana 44 axle
- Welding required
Fabrication and axle swap planning
A spring perch is the bracket the spring seats against, so it carries the axle load through the spring. When a custom Dana 30 or Dana 44 is mounted with these brackets, the axle position, pinion angle and spring rate need to be worked out together. Plan the geometry on paper before cutting any steel, since changes in wheelbase or track affect steering.
Weld quality matters because these brackets bear repeated load on trails. Use a welding process suited to the steel thickness, and inspect each weld for cracks after the first drives. Heat can warp thin plate, so fit-up should be checked before final welding. Axle brackets also change steering and suspension geometry, so alignment should be checked afterward.
- Confirm pinion angle before welding
- Inspect welds for cracking after early drives
- Check brake line and driveline clearance
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE9954 |
| UPC | 614901219388 |
| Part type | Spring perch (axle bracket) |
| Material | 1/4 inch and 3/16 inch cold rolled steel |
| Manufacturing | Laser cut, CNC formed |
| Axle use | Custom Dana 30 or Dana 44 axle |
| Installation | Welding required |
| Fit type | Fit type: universal |
Vehicle fitment
These brackets mount a custom Dana 30 or Dana 44 axle in a Jeep Wrangler JK, and they can also upgrade stock brackets.
They are made for the JK chassis. The brackets are for axle fabrication work, so check your axle and setup against the design before starting.
Installation notes
Welding is required, so this work should be done by an experienced fabricator or professional. Axle brackets affect steering and suspension geometry, so have the alignment and driveline angles checked and re-check fasteners after the first miles.














