Hitches
Showing 97–108 of 200 resultsSorted by popularity
-
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13153
- Fits the 2013–2018 Hyundai Santa Fe and 2019 Santa Fe XL on the manufacturer fitment list
- Curt Manufacturing Class III 2-inch receiver hitch, part number CRT13153
- Rear mount with a 2 inch by 2 inch receiver opening
- Designed by Curt for trailers over 4,000 pounds GTW and under 10,000 pounds
- Hitch ball, ball mount and hitch pin not included
SKU: CRT13153 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13146
- Fits 2014–2018 Acura MDX and 2016–2019 Honda Pilot per the manufacturer list
- Class III round tubular hitch with a 2 inches x 2 inches receiver
- Rear mount, direct fit, no-drill installation
- Gross trailer weight above 4,000 pounds, under 10,000 pounds GTW capacity
- Gloss black powder coating
- Part number CRT13146; does not fit with a roll pan
SKU: CRT13146 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13131
- Fits the 2013–2018 Ford Escape S, SE, SEL and Titanium per the manufacturer list
- Class III round tubular hitch, 2 inches x 2 inches receiver
- Rear mount, direct fit, no-drill installation
- Gross trailer weight above 4,000 pounds, under 10,000 pounds GTW capacity
- Gloss black powder coating
- Part number CRT13131; does not fit with a roll pan
SKU: CRT13131 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13102
- Fits 2010–2013 Mercedes-Benz GL350, 2007–2013 GL450, 2008–2013 GL550 and 2010–2011 ML350 per the manufacturer list
- Class III round tubular hitch with a 2 inches x 2 inches receiver
- Rear mount, direct fit, no-drill installation
- Gross trailer weight above 4,000 pounds, under 10,000 pounds GTW capacity
- Gloss black powder coating
- Part number CRT13102; does not fit with a roll pan
SKU: CRT13102 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13067
- Curt Manufacturing CRT13067 Class III/IV rear hitch with 2.5-inch receiver
- Fits the 2007–2014 Ford Edge and 2007–2015 Lincoln MKX
- No-drill round tubular design for towing above 4,000 pounds and below 10,000 pounds
- Does not fit with a roll pan
SKU: CRT13067 -
-
-
-
Receiver Hitches
Curt Manufacturing Class II 1-1/4″ Receiver Hitch – 12070
- Class II hitch with a 1-1/4-inch receiver
- Built for the 2010–2016 Cadillac SRX in Base, Luxury, Performance and Premium trims
- Rated to 3,500 lbs. gross trailer weight and 350 lbs. tongue weight
- Part number CRT12070, made in the USA
- Limited lifetime warranty
SKU: CRT12070 -
Receiver Hitches
Curt Manufacturing Class 3 Trailer Hitch with 2″ Receiver – 13118
- Fits 2015–2018 Ford F-150 in King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, XL and XLT trims
- Rated to 6,000 lbs. gross trailer weight and 900 lbs. tongue weight
- Compatible with a weight distribution hitch: 10,000 lbs. WD / 1,000 lbs. WDTW
- Rear-mount 2-inch receiver, Class III/IV
- Includes installation hardware and a limited lifetime warranty
SKU: CRT13118
Receiver hitch basics
A receiver hitch is a steel frame that bolts to the tow vehicle and presents a square opening for a ball mount, bike rack, or cargo carrier. Classes describe capacity and opening size. Class II typically uses a 1-1/4 inch receiver, while Class III, IV, and V commonly use 2-inch or larger openings with progressively higher ratings.
Most hitches here are vehicle-specific, which means the mounting points, bracket shape, and tailpipe clearance are designed for a given model. Multi-fit styles cover several vehicles but may need more care during installation.
Gooseneck and fifth wheel
Gooseneck and fifth wheel hitches mount to the truck frame under the bed and carry weight over or just ahead of the rear axle, which improves stability for heavy trailers. Look for in-bed ball mounts, install kits that fit your truck's frame, and handles, wedges, or adapters for existing rails.
Install kits and brackets are usually specific to a truck make, cab, and bed length. Compare part numbers carefully before choosing.
Choosing the right rating
- Check the vehicle's maximum tow rating and tongue weight rating in the owner's manual.
- Pick a hitch whose rated capacity meets or exceeds your trailer, but remember the lowest rating in the system governs.
- Consider weight distribution and sway control when trailer weight approaches the vehicle's limit.
- Look at features such as roll pan clearance, finish, and whether wiring is included.
Installing safely
Many hitches bolt into factory frame holes without drilling, though some need exhaust or bumper adjustments. Use the torque values the manufacturer specifies, support the hitch while you tighten fasteners, and recheck bolts after your first towing trips. For gooseneck and fifth wheel gear, professional installation is a sound choice because bed drilling and frame bracing are involved. Confirm fitment for your exact year, make, and model.
Pre-trip checks and common mistakes
A hitch is only as safe as its last inspection. Look over the welds and finish for cracks or rust, confirm every bolt is tight, and make sure the pin and clip are the correct size for the receiver. A loose-fitting ball mount can rattle, so some owners use an anti-rattle device or locking pin.
Common mistakes include forgetting to count the weight of cargo in the trailer, using a 1-1/4 inch receiver for loads that need a 2-inch one, and ignoring the ball height. Keep a written record of your vehicle's and trailer's ratings in the glovebox.
It also helps to know the parts around the hitch. A ball mount slides into the receiver and is secured by a pin and clip. The ball threads into the mount, and its shank diameter, commonly 3/4, 1, or 1-1/4 inch, must match the hole in the mount. The ball diameter, often 1-7/8, 2, or 2-5/16 inches, must match the trailer coupler. Check the rating stamped on each part.
Wiring is separate from the hitch. Most trailers use a 4-pin or 7-pin connector, and adapters are common. Safety chains should cross under the tongue and attach to the vehicle's chain loops, not the ball mount.
Finally, think about corrosion. Hitches live under the rear bumper where road salt and water collect. Touch up chips with paint, keep the receiver interior lightly greased, and pull the pin occasionally so it does not seize in place.
Popular Hitches brands
- Curt Manufacturing (92)
- DrawTite (48)
- B&W Hitch (33)
- Rugged Ridge (7)
- Smittybilt (5)
- Warn (3)
- Reese (3)
- Trimax Locks (2)
- Pro Series (2)
- Fab Fours (2)
- Fastway Trailer Products (2)
- Street Scene (1)
Shop Hitches by type
- Receiver Hitches (151)
- Weight Distributing Hitch (8)
- Gooseneck Trailer Hitch Ball (7)
- Fifth Wheel Trailer Hitch Head Unit (6)
- Fifth Wheel Trailer Hitch (3)
- Trailer Hitch Adapter (2)
- Weight Distributing Hitch Sway Control (1)
- Fifth Wheel Trailer Hitch Handle (1)
- Fifth Wheel Trailer Hitch Wedge (1)
Hitches FAQ
What is the difference between Class III and Class IV hitches?
Both usually use a 2-inch receiver, but Class IV has a higher rating than Class III. Exact ratings vary by manufacturer and by whether you use weight distribution, so check the specifications on the product and your vehicle's own tow rating.
Will a hitch fit with a roll pan?
Not always. Some hitches are designed to clear a roll pan and others are not. Listings sometimes state this directly. Check the fitment notes, and confirm against your exact year, make, and model.
What does a weight distributing hitch do?
It uses spring bars to spread part of the tongue weight to the tow vehicle's front axle and the trailer axles. This helps level the vehicle and can improve steering feel and braking when towing heavier trailers.
Can I install a hitch myself?
Many bolt-on receiver hitches are manageable with basic tools, a torque wrench, and a helper. Gooseneck and fifth wheel installs are more involved and often benefit from professional installation. Follow the maker's instructions and torque specifications.











