Overview
The Curt Manufacturing CRT13153 is a Class III 2-inch receiver hitch for the 2013–2018 Hyundai Santa Fe and the 2019 Hyundai Santa Fe XL. It is a round tubular receiver hitch mounted at the rear, with a 2 inch by 2 inch receiver opening for hitch-mounted accessories.
Curt positions this model for mid-capacity towing, which it defines as trailers with a gross trailer weight above 4,000 pounds and below 10,000 pounds. The hitch installs without drilling and has a gloss black powder coat.
Key features
- Round tubular Class III design for mid-capacity towing
- No-drill installation
- Rear mount with a 2 inch by 2 inch receiver opening
- Gloss black powder coating
- Does not fit with a roll pan
Using the receiver for accessories
A Class III receiver handles more than the trailer ball. Many owners add a cargo carrier, a bike rack or a tow-mounted light bar, and each accessory changes the load on the receiver. Choose accessories whose rating matches the receiver and the vehicle, and remember that a loaded carrier still counts toward the total weight on the hitch.
Look at the receiver regularly for cracks, bent tubing and rust near the welds. Accessories that rattle or shift often point to a worn pin, a loose mount or a damaged receiver. Keep the receiver free of mud and salt, and clean the pin hole so the pin slides in without binding.
- Remove a bike rack when towing a trailer
- Check accessory bolts after rough roads
- Use a locking pin to deter theft
- Store a removed mount clean and dry
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT13153 |
| Front or rear | Rear |
| Receiver size | 2 inches x 2 inches |
| Weight class | Class III/IV |
| Fitment type | Direct fit |
| Finish | Gloss black powder coating |
| Roll pan compatibility | Does not fit with roll pan |
| Designed trailer range | More than 4,000 pounds GTW and less than 10,000 pounds GTW |
Vehicle fitment
The manufacturer fitment list covers the 2013–2018 Hyundai Santa Fe (GLS, Limited, Limited Ultimate, SE, SE Ultimate) and the 2019 Hyundai Santa Fe XL (Limited Ultimate, SE).
Model years before 2013 and after 2019 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The frame does not need holes drilled for mounting. Check your Santa Fe’s year and trim against the fitment details above before you begin.
What’s included
Check the package contents against your installation requirements before starting.
Not included: Hitch ball, ball mount and hitch pin are separate components and are not part of the receiver.









