Overview
The Curt Manufacturing CRT13131 is a Class III 2-inch receiver hitch for the 2013–2018 Ford Escape in S, SE, SEL and Titanium trims. It mounts at the rear and uses a round tubular frame that Curt rates for trailers above 4,000 pounds gross trailer weight and below 10,000 pounds GTW capacity.
Curt presents the hitch as a no-drill option with a gloss black powder coat. It does not fit with a roll pan, so confirm your vehicle setup first.
Key features
- Class III round tubular hitch with a 2 inches x 2 inches receiver
- No-drill installation
- Rated for trailers above 4,000 pounds GTW and under 10,000 pounds GTW capacity
- Rear-mount, direct-fit design for the Ford Escape
- Gloss black powder coating
- Not compatible with a roll pan
Towing setup basics
A receiver hitch is one part of a towing setup, and the components should be matched to the trailer and to each other. The hitch ball, ball mount and hitch pin are separate parts, so check that each matches the receiver size and trailer coupler before hitching up. Mismatched parts are a common cause of rattling and wear.
Because a rear hitch carries load at the bumper, inspect the mounting bolts and the receiver tube periodically, especially after towing heavy loads or off-road use. Look for cracks near the welds and corrosion on the tube. Keep the receiver free of debris so pins seat fully and stay secure.
- Match ball size to the trailer coupler
- Check mounting bolts after the first tow
- Keep the receiver clear of dirt and corrosion
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT13131 |
| Hitch class | Class III/IV |
| Receiver size | 2 inches x 2 inches |
| Mounting | Rear, direct fit |
| Gross trailer weight | More than 4,000 pounds GTW; less than 10,000 pounds GTW capacity |
| Finish | Gloss black powder coating |
| Roll pan compatibility | Does not fit with roll pan |
| Installation | No drill |
Vehicle fitment
The manufacturer fitment list covers the 2013–2018 Ford Escape in S, SE, SEL and Titanium trims.
Escape model years outside 2013–2018 and other Ford models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hitch is a no-drill design. It will not fit alongside a roll pan, so confirm the vehicle has none before installing.
What’s included
The receiver hitch assembly. Check the package contents against your installation before starting.
Not included: hitch ball, ball mount and hitch pin, which are separate parts.









