Hitches
Showing 109–120 of 200 resultsSorted by popularity
-
Receiver Hitches
Curt Manufacturing Class 3 Multi-Fit Trailer Hitch with 2″ Receiver – 13901
- Class III multi-fit rear hitch with a 2 in x 2 in receiver
- Rated 5,000 lb gross trailer weight and 500 lb tongue weight
- With a weight distribution system: up to 7,500 lb gross trailer weight and 750 lb tongue weight
- Sliding frame adjusts to the width of the vehicle’s frame
- Does not fit with a roll pan
SKU: CRT13901 -
-
Receiver Hitches
Curt Manufacturing 2″ Front Receiver Hitch – 31008
- Fits 2008–2010 Ford F-250 Super Duty and F-350 Super Duty
- 2 in x 2 in receiver tube for front-mount accessories
- Rated 5,000 lb gross trailer weight and 500 lb tongue weight
- 9,000 lb straight-line pull rating for recovery and winch use
- Comes with all necessary mounting hardware
SKU: CRT31008 -
Gooseneck Trailer Hitch Mount Kit
B&W OEM Gooseneck Ball And Safety Chain Kit – GNXA2062
- B&W OEM gooseneck ball and safety chain kit, part number BNWGNXA2062
- Gooseneck ball and safety chain kit, marketed for towing boats, horses or RVs
- Fitment is given as Universal Fit with no vehicle years or models
SKU: BNWGNXA2062 -
-
-
Gooseneck Trailer Hitch
B&W Hitch Turnoverball Gooseneck Hitch – GNRK1019
- Turnoverball gooseneck hitch from B&W Hitch, part number GNRK1019
- Direct fit classification for listed 2019 to 2026 Chevrolet Silverado 1500 and GMC Sierra 1500 models
- Brand positions it for boats, horse trailers and RVs
SKU: BNWGNRK1019 -
Receiver Hitches
B&W Hitch Tow & Stow 3″ Receiver Hitch (Black) – TS30049B
- B&W Tow & Stow 3-inch receiver hitch, black, part number BNWTS30049B
- Rear-mounted 3 by 3 inch receiver; fits 2-inch, 2.5-inch and 3-inch receivers
- Rated for 21,000 pounds gross vehicle weight and 2,100 pounds vertical tow weight
- Adjustable in 1-inch increments; universal fit
SKU: BNWTS30049B -
-
Receiver Hitches
B&W Hitch Tow & Stow 2-1/2″ Drop Down Pintle Hitch (Black) – TS20055
- B&W Tow & Stow 2.5-inch drop down pintle hitch, black, part number BNWTS20055
- Rear-mounted with a 2.5 by 2.5 inch receiver size
- Universal fit with no specific vehicle named
- Stows under the vehicle when not in use
SKU: BNWTS20055 -
Receiver Hitches
B&W Hitch Tow & Stow 2-1/2″ Adjustable Dual-Ball Mount (Black) – TS20043B
- B&W Hitch Tow & Stow TS20043B, a 2-1/2 inch adjustable dual-ball mount
- Adjustable amount of drop or rise
- 2.5-inch shank in black steel
- Multiple ball sizes for different trailers
- Designed to stow under the vehicle when not in use
SKU: BNWTS20043B -
Receiver Hitches
B&W Hitch Tow & Stow 2″ Receiver Hitch (Chrome) – TS10048C
- B&W Tow & Stow 2-inch receiver hitch in chrome, part number BNWTS10048C
- Rear-mounted, 2 by 2 inch receiver, stows under the vehicle
- Rated universal fit by B&W rather than matched to one vehicle
- Works with several ball sizes from one hitch
SKU: BNWTS10048C
Receiver hitch basics
A receiver hitch is a steel frame that bolts to the tow vehicle and presents a square opening for a ball mount, bike rack, or cargo carrier. Classes describe capacity and opening size. Class II typically uses a 1-1/4 inch receiver, while Class III, IV, and V commonly use 2-inch or larger openings with progressively higher ratings.
Most hitches here are vehicle-specific, which means the mounting points, bracket shape, and tailpipe clearance are designed for a given model. Multi-fit styles cover several vehicles but may need more care during installation.
Gooseneck and fifth wheel
Gooseneck and fifth wheel hitches mount to the truck frame under the bed and carry weight over or just ahead of the rear axle, which improves stability for heavy trailers. Look for in-bed ball mounts, install kits that fit your truck's frame, and handles, wedges, or adapters for existing rails.
Install kits and brackets are usually specific to a truck make, cab, and bed length. Compare part numbers carefully before choosing.
Choosing the right rating
- Check the vehicle's maximum tow rating and tongue weight rating in the owner's manual.
- Pick a hitch whose rated capacity meets or exceeds your trailer, but remember the lowest rating in the system governs.
- Consider weight distribution and sway control when trailer weight approaches the vehicle's limit.
- Look at features such as roll pan clearance, finish, and whether wiring is included.
Installing safely
Many hitches bolt into factory frame holes without drilling, though some need exhaust or bumper adjustments. Use the torque values the manufacturer specifies, support the hitch while you tighten fasteners, and recheck bolts after your first towing trips. For gooseneck and fifth wheel gear, professional installation is a sound choice because bed drilling and frame bracing are involved. Confirm fitment for your exact year, make, and model.
Pre-trip checks and common mistakes
A hitch is only as safe as its last inspection. Look over the welds and finish for cracks or rust, confirm every bolt is tight, and make sure the pin and clip are the correct size for the receiver. A loose-fitting ball mount can rattle, so some owners use an anti-rattle device or locking pin.
Common mistakes include forgetting to count the weight of cargo in the trailer, using a 1-1/4 inch receiver for loads that need a 2-inch one, and ignoring the ball height. Keep a written record of your vehicle's and trailer's ratings in the glovebox.
It also helps to know the parts around the hitch. A ball mount slides into the receiver and is secured by a pin and clip. The ball threads into the mount, and its shank diameter, commonly 3/4, 1, or 1-1/4 inch, must match the hole in the mount. The ball diameter, often 1-7/8, 2, or 2-5/16 inches, must match the trailer coupler. Check the rating stamped on each part.
Wiring is separate from the hitch. Most trailers use a 4-pin or 7-pin connector, and adapters are common. Safety chains should cross under the tongue and attach to the vehicle's chain loops, not the ball mount.
Finally, think about corrosion. Hitches live under the rear bumper where road salt and water collect. Touch up chips with paint, keep the receiver interior lightly greased, and pull the pin occasionally so it does not seize in place.
Popular Hitches brands
- Curt Manufacturing (92)
- DrawTite (48)
- B&W Hitch (33)
- Rugged Ridge (7)
- Smittybilt (5)
- Warn (3)
- Reese (3)
- Trimax Locks (2)
- Pro Series (2)
- Fab Fours (2)
- Fastway Trailer Products (2)
- Street Scene (1)
Shop Hitches by type
- Receiver Hitches (151)
- Weight Distributing Hitch (8)
- Gooseneck Trailer Hitch Ball (7)
- Fifth Wheel Trailer Hitch Head Unit (6)
- Fifth Wheel Trailer Hitch (3)
- Trailer Hitch Adapter (2)
- Weight Distributing Hitch Sway Control (1)
- Fifth Wheel Trailer Hitch Handle (1)
- Fifth Wheel Trailer Hitch Wedge (1)
Hitches FAQ
What is the difference between Class III and Class IV hitches?
Both usually use a 2-inch receiver, but Class IV has a higher rating than Class III. Exact ratings vary by manufacturer and by whether you use weight distribution, so check the specifications on the product and your vehicle's own tow rating.
Will a hitch fit with a roll pan?
Not always. Some hitches are designed to clear a roll pan and others are not. Listings sometimes state this directly. Check the fitment notes, and confirm against your exact year, make, and model.
What does a weight distributing hitch do?
It uses spring bars to spread part of the tongue weight to the tow vehicle's front axle and the trailer axles. This helps level the vehicle and can improve steering feel and braking when towing heavier trailers.
Can I install a hitch myself?
Many bolt-on receiver hitches are manageable with basic tools, a torque wrench, and a helper. Gooseneck and fifth wheel installs are more involved and often benefit from professional installation. Follow the maker's instructions and torque specifications.











