Select your vehicle

Curt Manufacturing Class II 1-1/4″ Receiver Hitch – 12188

Curt Manufacturing

$236.98In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 10:40 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Class II rear hitch with a 1.25 in x 1.25 in receiver
  • Fits the 2018–2019 Ford EcoSport
  • Custom-fit design for the specific vehicle
  • Suited to light-duty towing and cargo carriers

Description

Overview

The Curt Manufacturing CRT12188 is a Class II rear trailer hitch with a 1.25 in x 1.25 in receiver. It is a custom-fit hitch made for the 2018–2019 Ford EcoSport rather than a general fit.

Class II hitches are generally used for adding storage with a cargo carrier or for towing a small, light-duty trailer. This design offers towing strength, an integrated look and a streamlined installation.

Key features

  • Custom-fit design for a specific vehicle
  • 1.25 in x 1.25 in receiver
  • Class II weight class
  • Rear mount position

Choosing a Class II setup

A Class II receiver suits lighter loads, so the accessories you add matter as much as the hitch itself. Before buying a cargo carrier or ball mount, check that its shank matches the receiver opening and that its rating covers the weight you plan to carry. Overloading a carrier can stress the receiver and mounting bolts, so keep loads well inside the limit.

Hitch pins and clips wear with repeated removal. Inspect them each time an accessory comes off and replace any that bend, crack or spin freely. A locking pin helps keep a ball mount from working loose on rough roads.

  • Match the shank to the receiver opening
  • Keep carrier loads below the rated limit
  • Inspect pins and clips after each removal

Specifications

Brand Curt Manufacturing
Part number CRT12188
Front or rear Rear
Receiver size 1.25 in x 1.25 in
Weight class Class II
Fitment type Direct fit

Vehicle fitment

It fits the 2018–2019 Ford EcoSport in the S, SE, SES and Titanium trims.

EcoSport model years outside 2018–2019 are not on the list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Check the package contents against your installation before starting.

Not included: A ball mount, cargo carrier or trailer is not included. The receiver accepts these accessories.

SKU: CRT12188 Categories: , ,

Fitment

VehicleYearsTrims
Ford EcoSport2018–2019S, SE, SES, Titanium

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the CRT12188 fit a 2020 Ford EcoSport?

No. It fits only the 2018–2019 Ford EcoSport, so 2020 models are not covered. Verify your year, model and trim before choosing this hitch.

What is the receiver size?

It has a 1.25 inch by 1.25 inch receiver tube and is marked Class II. Accessories need a 1.25 inch shank to fit the opening.

Are the weight ratings given?

Before towing with the CRT12188, confirm the trailer's gross and tongue weight against your vehicle's towing capacity and the hitch's rated limits.

What is the part number?

The part number is CRT12188, from Curt Manufacturing. It is a rear-mount Class II hitch with a direct fit for the 2018–2019 Ford EcoSport.

How often should the hitch bolts be checked?

Check them after the first few trips with a new accessory, then at regular intervals. Look for loose fasteners, rust near welds and cracks around the receiver. Re-tighten any loose parts and replace anything that shows damage.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon