Hitches
Showing 73–84 of 200 resultsSorted by popularity
-
-
-
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13831
- Fits 2000–2004 Nissan Frontier in SC, SE, SVE and XE trims
- Round tubular Class III receiver hitch
- No-drill installation
- Designed for towing above 4,000 pounds and below 10,000 pounds gross trailer weight
- Part number CRT13831, gloss black powder coat
SKU: CRT13831 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13591
- Fits Chevrolet Equinox 2005–2017, GMC Terrain 2010–2017, Pontiac Torrent 2006–2009 and Saturn Vue 2002–2007
- Class III rear receiver hitch with no-drill installation
- Rated 3500lbs gross trailer weight and 350lbs tongue weight
- Weight distributing rating of 4000lbs with 400 lbs weight distributing tongue weight
- Part number CRT13591, gloss black powder coat
SKU: CRT13591 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13534
- Fits 2008–2013 Toyota Highlander in Base, Hybrid, Hybrid Limited, Limited, Plus, SE and Sport trims
- Class III round tubular receiver hitch
- No-drill installation
- Designed for towing above 4,000 pounds and below 10,000 pounds gross trailer weight
- Part number CRT13534, gloss black powder coat
SKU: CRT13534 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13530
- Fits 2004–2006 Lexus RX330 (Base), 2007–2009 Lexus RX350 (Base) and 2006–2008 Lexus RX400h (Base)
- Fits 2004–2007 Toyota Highlander in Base, Hybrid, Hybrid Limited, Limited and Sport trims
- Class III round tubular receiver hitch with no-drill installation
- Designed for towing above 4,000 pounds and below 10,000 pounds gross trailer weight
- Part number CRT13530, gloss black powder coat
SKU: CRT13530 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13460
- Fits 2020–2021 Toyota Highlander, listed by Curt Manufacturing as a direct-fit custom hitch
- Class III/IV rear receiver hitch with a 2 inches x 2 inches receiver size
- Rated for 6,000 lbs gross trailer weight and 900 lbs tongue weight
- Weight distribution compatible, rated 8,000 lbs WD and 900 lbs WDTW
- Black powder coat over an A-coat rust prevention dip, with a limited lifetime warranty
SKU: CRT13460 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13419
- Fits the 2019 Ram 1500 in Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star, Rebel and Tradesman trims
- Rated to 6,000 lbs gross trailer weight and 600 lbs tongue weight
- Class III/IV rear receiver hitch with an open-back receiver
- Includes installation hardware; Curt Manufacturing part number CRT13419
SKU: CRT13419 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13401
- Round tubular Curt Class III/IV receiver hitch, part number CRT13401
- Fits 1973-1974 and 1987-1991 Chevrolet Blazer, 1975-1986 K5 Blazer and 1973-1991 GMC Jimmy
- No-drill installation, 2 inch by 2 inch receiver
- Does not fit with a roll pan
SKU: CRT13401 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13396
- Curt Manufacturing CRT13396 Class III rear receiver hitch with a 2 Inches X 2 Inches receiver.
- Direct fit for the 2017–2018 Land Rover Discovery in the HSE, HSE Luxury and SE trims.
- Weight class Class III/IV, rear mounting position.
SKU: CRT13396 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13394
- Curt Manufacturing CRT13394 Class III rear receiver hitch with a 2 Inches X 2 Inches receiver.
- Direct fit for the 2018–2019 Lexus RX350L (Base) and the 2014–2019 Toyota Highlander in the listed trims.
- Weight class Class III/IV; does not fit with a roll pan.
- Suited to boat trailers, popup campers, ATV trailers and utility trailers.
SKU: CRT13394 -
Receiver Hitches
Curt Manufacturing Class III 2″ Receiver Hitch – 13392
- Curt Class III hitch, part number CRT13392, for the 2018 Jeep Wrangler JL
- Rated 3,500 lbs gross trailer weight and 350 lbs tongue weight
- Compatible with a weight distribution hitch rated 4,000 lbs WD / 400 lbs WDTW
- Includes installation hardware; exhaust must be temporarily lowered
SKU: CRT13392
Receiver hitch basics
A receiver hitch is a steel frame that bolts to the tow vehicle and presents a square opening for a ball mount, bike rack, or cargo carrier. Classes describe capacity and opening size. Class II typically uses a 1-1/4 inch receiver, while Class III, IV, and V commonly use 2-inch or larger openings with progressively higher ratings.
Most hitches here are vehicle-specific, which means the mounting points, bracket shape, and tailpipe clearance are designed for a given model. Multi-fit styles cover several vehicles but may need more care during installation.
Gooseneck and fifth wheel
Gooseneck and fifth wheel hitches mount to the truck frame under the bed and carry weight over or just ahead of the rear axle, which improves stability for heavy trailers. Look for in-bed ball mounts, install kits that fit your truck's frame, and handles, wedges, or adapters for existing rails.
Install kits and brackets are usually specific to a truck make, cab, and bed length. Compare part numbers carefully before choosing.
Choosing the right rating
- Check the vehicle's maximum tow rating and tongue weight rating in the owner's manual.
- Pick a hitch whose rated capacity meets or exceeds your trailer, but remember the lowest rating in the system governs.
- Consider weight distribution and sway control when trailer weight approaches the vehicle's limit.
- Look at features such as roll pan clearance, finish, and whether wiring is included.
Installing safely
Many hitches bolt into factory frame holes without drilling, though some need exhaust or bumper adjustments. Use the torque values the manufacturer specifies, support the hitch while you tighten fasteners, and recheck bolts after your first towing trips. For gooseneck and fifth wheel gear, professional installation is a sound choice because bed drilling and frame bracing are involved. Confirm fitment for your exact year, make, and model.
Pre-trip checks and common mistakes
A hitch is only as safe as its last inspection. Look over the welds and finish for cracks or rust, confirm every bolt is tight, and make sure the pin and clip are the correct size for the receiver. A loose-fitting ball mount can rattle, so some owners use an anti-rattle device or locking pin.
Common mistakes include forgetting to count the weight of cargo in the trailer, using a 1-1/4 inch receiver for loads that need a 2-inch one, and ignoring the ball height. Keep a written record of your vehicle's and trailer's ratings in the glovebox.
It also helps to know the parts around the hitch. A ball mount slides into the receiver and is secured by a pin and clip. The ball threads into the mount, and its shank diameter, commonly 3/4, 1, or 1-1/4 inch, must match the hole in the mount. The ball diameter, often 1-7/8, 2, or 2-5/16 inches, must match the trailer coupler. Check the rating stamped on each part.
Wiring is separate from the hitch. Most trailers use a 4-pin or 7-pin connector, and adapters are common. Safety chains should cross under the tongue and attach to the vehicle's chain loops, not the ball mount.
Finally, think about corrosion. Hitches live under the rear bumper where road salt and water collect. Touch up chips with paint, keep the receiver interior lightly greased, and pull the pin occasionally so it does not seize in place.
Popular Hitches brands
- Curt Manufacturing (92)
- DrawTite (48)
- B&W Hitch (33)
- Rugged Ridge (7)
- Smittybilt (5)
- Warn (3)
- Reese (3)
- Pro Series (2)
- Fab Fours (2)
- Fastway Trailer Products (2)
- Trimax Locks (2)
- Rampage (1)
Shop Hitches by type
- Receiver Hitches (151)
- Weight Distributing Hitch (8)
- Gooseneck Trailer Hitch Ball (7)
- Fifth Wheel Trailer Hitch Head Unit (6)
- Fifth Wheel Trailer Hitch (3)
- Trailer Hitch Adapter (2)
- Weight Distributing Hitch Sway Control (1)
- Fifth Wheel Trailer Hitch Handle (1)
- Fifth Wheel Trailer Hitch Wedge (1)
Hitches FAQ
What is the difference between Class III and Class IV hitches?
Both usually use a 2-inch receiver, but Class IV has a higher rating than Class III. Exact ratings vary by manufacturer and by whether you use weight distribution, so check the specifications on the product and your vehicle's own tow rating.
Will a hitch fit with a roll pan?
Not always. Some hitches are designed to clear a roll pan and others are not. Listings sometimes state this directly. Check the fitment notes, and confirm against your exact year, make, and model.
What does a weight distributing hitch do?
It uses spring bars to spread part of the tongue weight to the tow vehicle's front axle and the trailer axles. This helps level the vehicle and can improve steering feel and braking when towing heavier trailers.
Can I install a hitch myself?
Many bolt-on receiver hitches are manageable with basic tools, a torque wrench, and a helper. Gooseneck and fifth wheel installs are more involved and often benefit from professional installation. Follow the maker's instructions and torque specifications.











