A complete XJ 4.5 lift needs coils, leaf springs, control arms, a track bar, shocks and brake lines. See the parts, axle limits and…
Track Bar Bracket
Showing 25–36 of 62 resultsSorted by popularity
Why track bar brackets matter
A track bar locates a solid axle side to side under the vehicle. When a suspension is lifted, the axle drops and the track bar's angle changes, which pushes the axle off-center and can create bump steer and wandering. A relocation or drop bracket lowers the frame-side or axle-side mount so the bar returns closer to level and the axle recenters.
Types of brackets
Several styles appear in this category.
- Front track bar brackets that mount to the frame or axle on the front suspension
- Rear lower and rear upper brackets for rear solid axles
- Relocation or drop brackets sized for a lift range, such as 3.0 to 4.5 inches or 4.5 to 7.5 inches
- Bolt-on mounts versus designs that require welding or cutting of the old mount
- Powder-coated or raw steel finish options
What to compare
Match the bracket to your lift height, since a bracket for a 3 inch lift will not be right for a 6 inch one. Confirm whether the part fits the front or rear, driver or passenger side, and the model: TJ and LJ, ZJ, JK or another platform. Some listings note exceptions, such as vehicles without a CV driveshaft.
Material thickness, gusseting and the size of the bolt holes affect strength. A bracket that works with your track bar's bushing or joint size and your stock or aftermarket bar is important. Some kits assume a matching adjustable track bar, so verify what pairs with what.
Installation and alignment
Track bar mounts are structural suspension components, so professional installation is recommended when welding is required or you are unfamiliar with suspension work. Support the vehicle on stands under the frame, with the weight of the vehicle on the suspension when final tightening bushings, and torque bolts to the manufacturer's specifications.
Check axle centering and tire clearance after installation, then have the alignment inspected. Re-torque fasteners after the first miles and inspect periodically if you drive off-road.
If you are building a lifted Jeep, it helps to plan the whole front suspension at once. Control arm length, track bar length and bracket position work together, so choosing a matched set of components from the same manufacturer often simplifies setup and reduces the chance of binding or misalignment.
Geometry, inspection and common pitfalls
The goal of a track bar bracket is a bar that runs nearly parallel to the ground at normal ride height, with a length that centers the axle under the body. A bar that slopes steeply causes the axle to shift sideways as the suspension cycles, which is felt as steering that tugs or a rear end that shifts in corners. Measuring the angle at ride height before and after installation helps confirm the improvement.
- Check that the bracket weld, or the factory mount it attaches to, is free of cracks or rust
- Use a stable jack and measure from a fixed point on the frame to the axle on both sides to confirm centering
- Make sure bolts are the specified grade and size, with proper washers and locking nuts
- Verify that the bar clears the exhaust, driveshaft, steering linkage and tires at full travel
- Inspect the bar's bushings for splits or wear, since a worn bushing can imitate a bracket problem
A common pitfall is adding a bracket and leaving an old, worn bar in place. Loose track bar bushings or a bent bar cause the same wandering a drop bracket is meant to cure. Another is overlooking the rear axle on lifted vehicles, where rear centering also changes and can affect high-speed stability and tire clearance.
Related guides
- The XJ Cherokee 4.5-Inch Lift: What a Complete Kit Needs
- Death Wobble: The Parts That Cause It and How to Fix It
Death wobble explained: why solid front axles shake after a bump, which worn parts cause it, how to find the loose joint with a…
Popular Track Bar Bracket brands
- Rubicon Express (15)
- Pro Comp Suspension (9)
- Skyjacker (9)
- TeraFlex (8)
- Tuff Country (5)
- ARB 4x4 Accessories (2)
- Rock Krawler (2)
- G2 Axle and Gear (2)
- Fabtech (2)
- ReadyLift (2)
- Trail Gear (1)
- Mountain Off Road Enterprises (1)
Track Bar Bracket FAQ
Do I need a track bar bracket after a lift?
Often yes, once the lift is more than a couple of inches. The bracket restores the bar's angle and recenters the axle, which improves steering stability.
Is a track bar bracket the same as an adjustable track bar?
No. A bracket relocates the mount point, while an adjustable track bar changes the length of the bar itself. Some setups use both, depending on lift height and how far the axle shifted.
Can I install a track bar bracket myself?
Bolt-on versions can be done with basic tools and jack stands. Designs that need welding require skill, and any suspension part affects safety, so consider professional installation.
How do I choose between front and rear brackets?
Pick the bracket for the axle where the track bar is mounted, and match the lift range and model. Front and rear brackets are shaped differently and are not interchangeable.










