Overview
The Rubicon Express front track bar bracket, part number RE1675, is a frame side bracket made for 2-door and 4-door models.
The bracket is laser cut from 3/16-inch cold rolled steel and then CNC formed for a precise fit. It is made for cleanly mounting a custom axle.
Key features
- Laser cut from 3/16-inch cold rolled steel
- CNC formed for precision
- Frame side mount
- For 2-door and 4-door models
Track bar setup basics
A track bar keeps the axle centered under the frame as the suspension moves. When an axle is replaced or relocated, the track bar mounts must be placed carefully so the bar sits level and the axle stays square. A frame side bracket gives a solid point to anchor the bar and reduces stress on the axle housing.
Changing axle width or suspension height changes the bar angle, and an angle that is too steep can wear the bushings or bind at full travel. Measure the bar length and check its range of motion before final tightening. Recheck mounting bolts after the first few drives, since new brackets settle under load.
- Mount the bar level when the axle is centered
- Check bushings for wear at each service
- Confirm clearance at full suspension travel
- Use hardware suited to the bracket’s steel thickness
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1675 |
| UPC | 614901438857 |
| Material | 3/16-inch cold rolled steel |
| Process | Laser cut, CNC formed |
| Mount | Frame side |
| Models | 2-door and 4-door |
Vehicle fitment
It is made for 2-door and 4-door models. Confirm fit for your vehicle’s year, model and trim before ordering.
Measure your axle and frame mounting points and compare them with your build before ordering.
What’s included
The bracket only. No mounting hardware is listed.
Not included: The track bar, the axle and the mounting hardware.











