Overview
The Pro Comp 62687 is a frame side track bar bracket for vehicles with 2.5 to 3.5 inches of lift. A lift moves the axle and changes the track bar geometry, so the bracket relocates the track bar mount to keep the axle centered and the wheels tracking straight. It is a direct-fit design for frame side mounting.
Confirm fit for the year, make and model before ordering, since the bracket has to match the frame and the lift height of the truck.
Key features
- Track bar relocation for 2.5 to 3.5 inches of lift
- Frame side mount
- Direct-fit design for frame side mounting.
- Relocates the track bar after a lift
Frame and steering clearance
A bracket that moves the track bar mount adds a new load path into the frame, so the mounting area matters as much as the bracket itself. Look over the frame rail and crossmember for cracks, rust or previous repairs before fitting anything. The bar should sit square to the axle once the bracket is in place, and the steering components need room at full lock in both directions.
Track bar mounts are often inspected together with the drag link and tie rod ends after a lift. Worn ends make it hard to hold a new alignment, so replace any part showing play before setting the bracket. Check the clearance again after the first few drives on uneven ground.
- Check clearance at full lock both directions
- Inspect frame rails for cracks or old repairs
- Re-check bar length after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| UPC | 614901022636 |
| Lift range | 2.5 to 3.5 inches |
| Mount type | Frame side |
| Fitment type | Direct fit (vehicles not named) |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering.
The bracket is sized for a lift range rather than a vehicle, so confirm both the lift height and the vehicle before buying. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A track bar bracket changes where the track bar attaches, so the bar length and the axle centering need to be checked after the install. Confirm the bracket clears the frame and the steering components at full lock.
What’s included
Check the package contents against your installation before starting.







