Select your vehicle
-13%

Pro Comp Track Bar Bracket – 62684

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Frame side track bar bracket for 2.5 to 3.5 inches of lift
  • Relocates the track bar mount after a lift
  • Keeps the axle and wheels tracking straight, per the manufacturer
  • Confirm the year, make and model before ordering

Description

Overview

The Pro Comp 62684 is a frame side track bar bracket made for 2.5 to 3.5 inches of lift. After a lift, the track bar mount no longer sits where the factory put it, so this bracket relocates the mount to keep the axle centered. Its purpose is to keep the axles and wheels tracking straight once the vehicle has been lifted.

The bracket is direct fit and mounts on the frame side. Confirm the year, make and model before buying, since the vehicle match needs to be checked.

Key features

  • Frame side mounting
  • Lift range of 2.5 to 3.5 inches
  • Track bar relocation after a lift
  • Direct-fit design

Lift height and axle centering

Lifting a truck moves the axle and the track bar mount relative to each other. The factory bar was set for stock height, so a lift changes the bar angle and lets the axle drift off center. A relocation bracket restores a better angle, but only if the bar length and mounting points are checked afterward.

Lift height is the main factor in choosing a bracket. Match the bracket’s lift range to the truck’s actual height before ordering, and measure ride height on both sides to confirm it is level. A bracket sized for a different range may not place the mount correctly.

After the install, drive on a flat road and watch for wandering or a steering wheel that sits off center. Look at the bar ends, bushings and mounting bolts for play, and retorque hardware after the first few drives.

  • Measure ride height on both sides
  • Check bar length after relocation
  • Inspect frame clearance at full lock

Specifications

Brand Pro Comp Suspension
Part number 62684
UPC 614901022605
Lift range 2.5 to 3.5 inches
Mount type Frame side
Fitment type Direct fit (vehicles not named)

Vehicle fitment

Confirm your truck’s year, make and model before ordering so the bracket matches the vehicle.

Because the bracket is sized to a lift range, confirm that the lift height on the truck falls within 2.5 to 3.5 inches. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Relocating the track bar mount changes the bar angle, so the bar length and the axle centering should be checked after the bracket is fitted. Confirm the bracket clears the frame and the steering parts at full lock.

What’s included

Check the parts list for mounting hardware before starting the install.

SKU: EXP62684 Category:

Specification

Shipping weight 17.00 lbs
Package dimensions 17.00 × 14.00 × 9.00 in
brands

Questions & Answers

Is the 62684 the same as the 62687?

Both are track bar brackets for 2.5 to 3.5 inches of lift, with a frame side mount. They have different part numbers and UPCs, so match the part number to the bracket you need.

Does the 62684 fit a Jeep Wrangler?

Confirm your vehicle's year, make, model and trim before ordering, since a Wrangler match is not established for this bracket.

What does the bracket do after a lift?

It relocates the track bar mount so the axle stays centered and the wheels track straight after a lift. The bracket is sized for 2.5 to 3.5 inches of lift.

Can a track bar bracket fix bump steer?

It can help when the bar angle is the cause, but it does not correct the rest of the steering linkage. Check the drag link, tie rod ends and track bar ends as well, since worn parts can produce bump steer even with the bracket fitted.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon