Overview
The Rubicon Express RE1607 is a rear lower track bar bracket for the axle side of a custom axle. It is a direct fit mount for 2-door and 4-door models.
The bracket is laser cut from 3/16-inch cold rolled steel and CNC formed for precision and strength. It mounts on the axle side.
Key features
- Rear lower position, axle side
- Laser cut 3/16-inch cold rolled steel
- CNC formed for precision
- Fits 2-door and 4-door models.
Axle side track bar mounts
An axle side track bar bracket takes the side load from the track bar and transfers it into the axle housing. Because the bar pushes and pulls against this point through every bump, the bracket and its welds see repeated stress. A precise fit matters here: even a small misalignment changes the bar’s angle and can shift the axle off center.
Before final fitting, dry-fit the bracket and check the bar’s position against it, then tighten all hardware to the fastener specifications for your vehicle. Look for cracks or distortion after hard trail use, and recheck the bolts after the first drives. A custom axle setup should be checked for clearance at full travel.
- Dry-fit before final tightening
- Check welds and edges after hard use
- Confirm clearance at full travel
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1607 |
| UPC | 614901438727 |
| Material | 3/16-inch cold rolled steel |
| Position | Rear lower, axle side |
| Body style | 2-door and 4-door |
Vehicle fitment
It is made for a custom axle, so confirm the mounting points match your axle before ordering.
Confirm the bracket matches your axle and frame layout. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the axle side position against the track bar before final fitting, since the bracket mounts there.
What’s included
One rear lower track bar bracket.








