Select your vehicle
-13%

Rubicon Express Track Bar Bracket Brace XJ – RE1670

Rubicon Express

Shop Jeep Cherokee XJ Track Bar Brackets on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Track bar bracket brace for the 1984 to 2001 Jeep Cherokee (XJ)
  • Used with the R/ERE1665 track bar bracket
  • Frame side type, direct fit
  • Part number RE1670, UPC 614901438833

Description

Overview

The RE1670 is a track bar bracket brace for the 1984 to 2001 Jeep Cherokee (XJ). It is a frame side part that fits 1984 to 2001 XJ Cherokee models.

It is used with the R/ERE1665 track bar bracket to limit unibody flex during harsh off-road driving.

Key features

  • Brace for use with the R/ERE1665 track bar bracket
  • Designed for the 1984 to 2001 XJ Cherokee
  • Frame side type
  • Direct fit for the 1984 to 2001 XJ Cherokee.

Track bar geometry basics

A track bar keeps the axle centered under the body side to side, so a lifted or flexing Cherokee does not drift when the suspension moves. On a unibody vehicle such as the XJ, the body itself can twist under load, which is why bracing the track bar mount matters on rough terrain.

Before fitting a bracket or brace, inspect the frame mount area for cracks, rust and loose welds. Check that the bolts go through the intended holes without forcing, and that the track bar swings freely through full travel. Tighten all fasteners after the first few trail runs.

Track bar mounts are often replaced alongside bushings and the track bar itself, since worn joints allow the axle to shift and make steering feel loose. A track bar set at the wrong height can also change steering geometry, so measure the axle position after any lift or bracket work.

Specifications

Brand Rubicon Express
Part number RE1670
UPC 614901438833
Vehicle Jeep Cherokee (XJ), 1984 to 2001
Type Frame side
Fit type Direct fit
Used with R/ERE1665 track bar bracket

Vehicle fitment

The brace fits 1984 to 2001 XJ Cherokee models.

It is not designed for the Wrangler (TJ) or other Cherokee generations. Match your vehicle’s year, model and trim to the fitment before buying.

Installation notes

Install it together with the R/ERE1665 track bar bracket on the same XJ, since the brace is made to work with that bracket.

What’s included

Compare the hardware against your installation before starting.

Not included: The R/ERE1665 track bar bracket, which the brace is used with.

SKU: R/ERE1670 Category:

Specification

Shipping weight 6.25 lbs
Package dimensions 36.40 × 4.30 × 4.30 in
brands

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ) likely fits1984–2001All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the RE1670 fit a Jeep Wrangler TJ?

No. The brace is made for the 1984 to 2001 XJ Cherokee. It is not designed for the Wrangler TJ, so do not assume it fits TJ models.

What is the RE1670 used with?

It is used with the R/ERE1665 track bar bracket. The brace is designed to limit unibody flex during harsh off-road driving, and both parts should be installed on the same XJ.

Is the RE1670 a frame side part?

Yes, it is a frame side part. Check the mounting against your frame before installing, and verify the year, model and trim first.

How can I tell if the track bar mount needs attention?

Look for cracks around the frame mount, movement at the bracket bolts, or a steering wheel that wanders at speed. Inspect these points during routine service and after hard off-road use, because a loose mount lets the axle drift from side to side.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Cherokee XJ Track Bar Brackets on Amazon