Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 517–528 of 3453 resultsSorted by popularity
-
Shock Absorbers & Shock Accessories
Icon Suspension 0 -1.5 Inch Rear 2.5 Aluminum Shock Kit – 57620P
Shock Absorbers & Shock AccessoriesIcon Suspension 0 -1.5 Inch Rear 2.5 Aluminum Shock Kit – 57620P
- Rear 2.5 aluminum shock kit for 0 to 1.5 inch lift on 2007–2021 Toyota Tundra
- Configured for the application in length and damping tune
- 100% rebuildable and revalveable
- Larger diameter and oil volume than the 2.0 Aluminum Series
- Part number ICO57620P
SKU: ICO57620P -
Shock Absorbers & Shock Accessories
Icon Suspension 0 – 3.5 Inch Front Coilover Shock Kit – 58650
- Front coilover kit with 3.5 bypass reservoir for 2007–2021 Toyota Tundra
- Adds 2 inches of wheel travel
- Hardware for installation included
- Recommended tire 305/60R18 on 18×9 wheels with 5 inch back spacing
- Part number ICO58650
SKU: ICO58650 -
Shock Absorbers & Shock Accessories
Icon Suspension 0 – 3.5 Inch Front Coilover Shock Kit – 58630
- Front coilover kit for 0 to 3.5 inch lift on 2005–2023 Toyota Tacoma
- 3.5 bypass reservoir coilover with hydraulic damping
- Complete hardware plus sway bar relocation bracket kit
- Recommended tire 285/75R16 on 16×8 wheels with 5 inch back spacing
- Part number ICO58630
SKU: ICO58630 -
Shock Absorbers & Shock Accessories
Icon Suspension 0 – 3 Inch Front 2.5 VS Coilover Shock Kit – 71505
Shock Absorbers & Shock AccessoriesIcon Suspension 0 – 3 Inch Front 2.5 VS Coilover Shock Kit – 71505
- Front 2.5 VS coilover for a 0 to 3 inch lift, GMT 900 Chevrolet and GMC half-ton trucks
- Adds 1 inch of wheel travel when paired with ICON arm part 78600
- More lift height than the standard travel coilovers
- Valved for the GMT 900 platform, 2WD and 4WD
- Part number ICO71505
SKU: ICO71505 -
Shock Absorbers & Shock Accessories
Icon Suspension 0 – 3 Inch Front 2.5 VS Coilover Shock Kit – 58610
Shock Absorbers & Shock AccessoriesIcon Suspension 0 – 3 Inch Front 2.5 VS Coilover Shock Kit – 58610
- Front coilover kit for 0 to 3 inch lift on 1996–2002 Toyota 4Runner and 1995–2004 Toyota Tacoma
- 2.5 VS series coilover with hydraulic damping
- Complete installation hardware included
- Recommended tire 285/75R16 with 16×8 wheels and 4.5 inch back spacing
- Part number ICO58610
SKU: ICO58610 -
Shock Absorbers & Shock Accessories
Icon Suspension 0 – 2.5 Inch Front 2.5 VS Coilover Shock Kit – 58620
Shock Absorbers & Shock AccessoriesIcon Suspension 0 – 2.5 Inch Front 2.5 VS Coilover Shock Kit – 58620
- Front coilover kit for 0 to 2.5 inch lift on 2000–2006 Toyota Tundra
- 2.5 series coilover with hydraulic damping
- Complete hardware included for installation
- Recommended tire size 285/75R16 with 16×8 wheels and 4.5 inch back spacing
- Part number ICO58620
SKU: ICO58620 -
Shock Absorbers & Shock Accessories
Icon Suspension 0 – 2 Inch Rear 2.5 Piggyback Shock Kit – 77750CP
Shock Absorbers & Shock AccessoriesIcon Suspension 0 – 2 Inch Rear 2.5 Piggyback Shock Kit – 77750CP
- Rear piggyback shock kit with CDCV valve for 2015 and newer Chevrolet Colorado and GMC Canyon
- 2.5 inch diameter body with a piggyback reservoir
- CDCV valve with 10 external settings from soft to hard
- Bump zone for added control at full compression
- Part number ICO77750CP
SKU: ICO77750CP -
Shock Absorbers & Shock Accessories
Icon 2.5 Inch Rear 2.5 V.S. Series Piggyback Reservoir Shock Absorber Set – 27726P
Shock Absorbers & Shock AccessoriesIcon 2.5 Inch Rear 2.5 V.S. Series Piggyback Reservoir Shock Absorber Set – 27726P
- Rear piggyback reservoir shock set for 2.5 inch lift, 2018–2026 Jeep Wrangler JL
- Piggyback reservoir with hydraulic damping
- Monotube-style piggyback design
- From ICON, a maker of aftermarket suspension for trucks and SUVs
- Part number ICO27726P
SKU: ICO27726P -
Shock Absorbers & Shock Accessories
Icon 2.0 Aluminum Series Rear Shock for 2.5 Inch Lift – 26524
- Rear monotube shock for 2.5 inch lift, fits 2018–2026 Jeep Wrangler JL
- Nitrogen charged with internal reservoir
- Chrome plated steel shaft and aluminum top cap
- Polyurethane bushings and zinc plated sleeves
- Part number ICO26524
SKU: ICO26524 -
Shock Absorbers & Shock Accessories
Icon 2.0 Aluminum Series Front Shock for 2.5 Inch Lift – 26523
- Front monotube shock for 2.5 inch lift, fits 2018–2026 Jeep Wrangler JL and 2020–2026 Gladiator
- Nitrogen charged with an internal reservoir
- Chrome plated hardened steel shaft and aluminum rod end
- Polyurethane bushings and forged steel mounting stems
- Part number ICO26523
SKU: ICO26523 -
Shock Absorbers & Shock Accessories
Fox Performance Series 2.0 Snap Ring Coil-Over IFP Shock – 985-62-009
Shock Absorbers & Shock AccessoriesFox Performance Series 2.0 Snap Ring Coil-Over IFP Shock – 985-62-009
- Front coilover shock for 2015–2020 Ford F-150 with bar pin lower mount
- Reuses the stock spring and mounting hardware through a custom spring seat
- Three preload settings for 0, 1 or 2 inches of lift
- Bar pin lower mount, impact-extruded aluminum body
- Part number FOX985-62-009
SKU: FOX985-62-009 -
Shock Absorbers & Shock Accessories
Fox Performance Series 2.0 Snap Ring Coil-Over IFP Shock – 985-62-004
Shock Absorbers & Shock AccessoriesFox Performance Series 2.0 Snap Ring Coil-Over IFP Shock – 985-62-004
- Front coilover shock for 2007–2013 Chevrolet Silverado 1500 and GMC Sierra 1500
- Reuses the stock spring and mounting hardware through a custom spring seat
- Three preload settings for 0, 1 or 2 inches of lift
- Impact-extruded aluminum body
- Part number FOX985-62-004
SKU: FOX985-62-004
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.



