Overview
The Skyjacker H7083 is a rear Softride Hydro shock absorber for Chevrolet and GMC full-size trucks and SUVs from model years 1968 through 2000. It is part of the H7000 Hydro Series and is made for trucks with a 3 to 4 inch lift.
Shocks like this one control how the axle rebounds and compresses over rough ground and on the highway. The H7083 uses twin tube construction with hydraulic damping, so it is a rear unit with a hydraulic body rather than a gas-charged design.
Key features
- Multi-stage, velocity sensitive valving
- Twin tube body construction
- Bonded iron piston
- Hardened, double chrome 5/8 in. rod
- Red polyurethane bushings and a red boot
Rear shock on older trucks
Rear shocks on full-size trucks control axle rebound and compression under load, and older rear suspensions often need a damper that holds its rate after years of use. Hydraulic damping with a bonded iron piston and a 5/8 in. rod is designed for steady control, and the red boot helps keep grit away from the rod.
Because coverage spans several decades, check the truck’s generation and model before buying, since rear shock lengths vary. When one rear shock is replaced, compare the other side to see whether it has similar wear. Shocks with worn bushings or a cracked boot can make the ride feel loose, and the rear end may bounce longer after a dip.
- Compare shock length with the old unit
- Replace rear shocks in matched pairs
- Check spring hardware at the same time
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | H7083 |
| UPC | 803696141398 |
| Series | H7000 (Hydro Series) |
| Position | Rear |
| Damping type | Hydraulic |
| Lift height | 3 to 4 in. |
| Rod diameter | 5/8 in., hardened and double chrome |
| Piston | Bonded iron |
| Bushings | Red polyurethane |
| Warranty | Limited lifetime (per Skyjacker) |
| Sold as | Each |
Vehicle fitment
It fits Chevrolet and GMC full-size pickups and Suburbans, Blazers, the Tahoe, Yukon and Jimmy, and the C10, C20, C30, K1500, K2500, K3500, R10 to R30, V30 and V3500 models. Coverage runs from 1968 to 2000, by generation.
Years outside 1968 to 2000, and Chevrolet or GMC models not named in the manufacturer list, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Support the rear axle before removing the original shock, and keep the vehicle secured on stands while the new unit is fitted. Check that the red boot and bushings are seated before the wheels go back on.
What’s included
One Skyjacker H7083 shock absorber with red polyurethane bushings and a red boot, sold as each.
Not included: Check the package contents against your installation before starting.









